Brochure

Square-Duct™ Wireways
Oiltight—NEMA Type 12 Wireway
© 1986—2011 Schneider Electric
All Rights Reserved
18
08/2011
™
Lay-In Telescope Fitting Junction Box Cross
Length is easily adjustable from 1.00 in. (25 mm) to
7.00 in. (178 mm). No cutting or welding required.
The junction box has a removable panel on which
terminal blocks and other components may be
mounted. Panel dimensions are:
8.75 in. x 6.88 in. (222 mm x 175 mm) for F-22LJ
10.75 in. x 8.88 in. (273 mm x 225 mm) for F-44LJ
12.75 in. x 10.88 in. (324 mm x 276 mm) for F-66LJ
14.75 in. x 12.88 in. (375 mm x 327 mm) for F-88LJ
Used when there are four branches, all open along the
same side.
90° Elbow Top Opening 90° Elbow Inside Opening 90° Elbow Outside Opening
Because sections of lay-in wireway can be mounted with covers oriented in any direction, three different 90° elbows are offered. Proper selection allows the user to
maintain the same access and thereby preserve the lay-in feature for right-angle installations.
1.00 in.
(25 mm)
to
7.00 in.
(178 mm)
10.25 in.
(260 mm)
Gasket
Flange
Panel