Brochure

Square-Duct™ Wireways
General Purpose—NEMA Type 1 Painted Wireway
11
08/2011
© 1986—2011 Schneider Electric
All Rights Reserved
™
Telescope Fitting Open Adapter Panel Adapter
Length is easily adjustable to approximately 12.00 in. (305 mm).
No cutting or welding required.
Used with the 90° Elbow-Tee-Cross fitting to
permit a run directly up or down.
A flanged fitting which allows the wireway to
be securely connected to an enclosure.
Connector
Wireway sections and fittings are rigidly joined together with connectors. The top member swings aside to retain the lay-in feature. A connector is required at each
wireway joint except at telescope fittings, panel adapters, open adapters, closing plates or reducers. Connectors must be ordered separately.
Closing Plate Reducer Drop Hanger
Closes the end of a wireway section or run. Used to reduce to a smaller wireway size. Used to support a wireway run.
Bracket Hanger
Support Hanger
Used to support a wireway run.
Support hangers can be used for floor or wall
installations.
15.00 in.
(381 mm)
.75 in.
(19 mm)
1.50 in.
(38 mm)
1.00 in.
(25 mm)
1.50 in.
(38 mm)
2.00 in. (51 mm) on:
8.00 in. x 8.99 in. (203 mm x 203 mm)
10.00 in. x 10.00 in. (254 mm x 254 mm)
12.00 in. x 12 in. (305 mm x 305 mm)
1.38 in. (35 mm) on:
2.00 in. x 200 in. (51 mm x 51 mm)
4.00 in. x 4.00 in. (102 mm x 102 mm)
6.00 in. x 6.00 in. (152 mm x 152 mm)