Brochure

Square-Duct™ Wireways

General Purpose—NEMA Type 1 Painted Wireway

08/2011

™

Straight Section 90° Flush Tee 90° Sweep Elbow

Available in lengths from 1 ft (30 cm) to 10 ft (305 cm).

Use wherever flush mounting against a

vertical or horizontal surface is required.

When a large radius is needed, use this

sweep elbow.

90° Cross-Junction 90° Elbow 45° Elbow

This unique fitting forms left or right 90° turns. It can also

be used as a tee or cross. When fitted with an open adapter,

entrances can be made in the top and bottom. Each unit includes

two closure plates.

Any side can be removed, so lay-in feature is

retained regardless of how the elbow is

oriented. Sides are held together with screws.

Similar to the 90° elbow in design and

function.

This drawing illustrates how most of the

General Purpose—NEMA Type 1 Painted Wireway sections and

fittings could be used in an actual wireway run. The covers have

been omitted to present the lay-in feature more clearly. Many

different sections and fittings can be combined in any configuration

desired.