Brochure

© 2019 Schneider Electric
All Rights Reserved
18-59
www.se.com/us
TeSys™ AK5 Panel Busbar System Wiring Systems
Refer to Catalog LVYED213001EN
TeSys™ AK5 Panel Busbar System
The AK5 pre-fabricated bus bar system provides a quick and easy method of mounting
control devices. All components are finger safe, UL Listed, CSA approved and CE
marked. Although the AK5 system can be screw mounted onto any type of support, it
must be mounted on the AM1DL201 DIN rail when component mounting plates
incorporating a tap-off are used. When using tap-offs, the nominal operating current of
the bus bar (160 A @ 35°) must not be exceeded. Approvals include IEC 439, UL, CSA,
DNV and LROS.
AK5JB143
Table 18.188: 160 A, 3-Phase Busbar System
Maximum number of mounting plates
Length
Catalog Number
Tap-off
Standard Width
Plate
Extension Plate
1.42 in. 36 mm 2.13 in. 54 mm 2.80 in. 71 mm in. mm
6 4 2 13.39 344 AK5JB143
9 6 3 17.64 452 AK5JB144
12 8 4 21.85 560 AK5JB145
15 10 5 26.05 668 AK5JB146
24 16 8 38.69 992 AK5JB149
27 18 9 42.90 1100 AK5JB1410
AK5PA231
Table 18.189: Mounting Plate Tap-off
(plugs into busbar mounted on AM1DL201 DIN rail)
Width Thermal
Current Amperes
Application Catalog Number
in. mm
2.13 54 25 A
GV2 with
LUS or LUB 12 and 32 AK5PA231
2.13 54 25 A contactor AK5PA232
4.25 108 25 A
reversing contactor
AK5PA232S
AK5PA232S
Table 18.190: Bus Tap-off
(plugs into busbar for wiring to a separately mounted device)
Width Thermal
Current (A)
Length of Leads
Catalog Number
in. mm in. mm
1.42 36 32 A 9.84 250 AK5PC33
1.42 36 32 A 39.37 1000 AK5PC33L
AK5PC33
AM1DL201
Table 18.191: Extension Plates—Used to mount wider components.
Bolt to standard mounting plates (after DIN rails are removed).
Width
Application Catalog Number
in. mm
2.80 71
GV & Reversing contactor
AK5PE27
Table 18.192: Mounting Rail (must be used for mounting plates with tap-offs)
Description
Depth Length
Catalog
Number
mm mm
75 mm Omega Rail
15 2000 AM1DL201
File E161251
CCN NMTR
File LR 89150
Class 6228-01
18
CONTACTORS AND STARTERS-IEC
9/13/2019