Submittal Sheet

Product datasheet
Characteristics
HOM48L125GRB
Main
Product or component type
Load Center
Range of product
Homeline
Load center type
Main lugs
Line Rated Current
125 A
Number of spaces
4
Number of circuits
8
NEMA degree of protection
NEMA 3R outdoor
Cover type
Surface cover
Electrical connection
Lugs
Provided equipment
Grounding bar (1)
Complementary
Short-circuit current
10 kA
Number of tandem circuit breakers
4
Phase
1 phase
System Voltage
120/240 V AC
AWG gauge
AWG 14...AWG 2/0 (copper)
AWG 12...AWG 2/0 (aluminium)
Wiring configuration
3-wire
Cover finish
Gray baked enamel
Material
Tin plated aluminium busbar
Enclosure material
Welded galvannealed steel
Surface finish
Baked enamel grey
Box number
15R
Height
376 mm
Width
8.9 in (226 mm)
Depth
4.25 in (108 mm)
Environment
product certifications
UL E-6294
Offer Sustainability
Green Premium product
Green Premium product
Compliant - since 1248 - Schneider Electric declaration
of conformity
Compliant - since 1248 - Schneider Electric declaration of conformity
Reference not containing SVHC above the threshold
Reference not containing SVHC above the threshold
Available
Available
Need no specific recycling operations
Need no specific recycling operations
WARNING: This product can expose you to chemicals
including:
WARNING: This product can expose you to chemicals including:
Lead and lead compounds which is known to the State
of California to cause cancer and birth defects or other
reproductive harm.
Lead and lead compounds which is known to the State of California to cause cancer
and birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov
For more information go to www.p65warnings.ca.gov
Contractual warranty
Warranty period
Lifetime
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
1 / 2