Installation Guide
Table Of Contents
- 40270-308-05_eng
- 40270-308-05_spa
- H1G-S Generic Topic 1st Level - Introducción
- PBB-S Begin Safety Statements Bulleted List - • Utilice equipo de protección personal (EPP) apropiado y siga las prácticas de seguridad en trabajos eléctricos establecidas por su Compañía, consulte la norma 70E de NFPA o Z462 de CSA y NOM-029-...
- H2G-S Generic Topic 2nd Level - Construcción de barras de dos hileras
- H2G-S Generic Topic 2nd Level - Construcción de barras de una hilera
- H2G-S Generic Topic 2nd Level - Retire las placas removibles de la cubierta
- H1G-S Generic Topic 1st Level - Preparación para la instalación
- NB-S Begin Numbered List - 1. Retire los discos removibles. Según el diseño de discos removibles, utilice un destornillador para hacer palanca y extraer los discos exteriores uno por uno hasta obtener la abertura necesaria.
- H2G-S Generic Topic 2nd Level - Cómo instalar un interruptor automático
- NB-S Begin Numbered List - 1. Desenergice (O/OFF) el interruptor automático.
- NC-S Continue Numbered List - 2. Inserte el extremo con terminal del interruptor automático en el gancho de montaje.
- NC-S Continue Numbered List - 3. Empuje el interruptor hacia dentro hasta que las mordazas enchufables encajen firmemente sobre el conector de barra.
- NC-S Continue Numbered List - 4. Instale los conductores.
- NB-S Begin Numbered List - 1. Desenergice (O/OFF) el interruptor automático.
- H2G-S Generic Topic 2nd Level - Identificación de los circuitos
- H2G-S Generic Topic 2nd Level - Cómo energizar el circuito
- H2G-S Generic Topic 2nd Level - Cómo desmontar un interruptor automático
- H1G-S Generic Topic 1st Level - Introducción
Circuit Breaker Installation for Homeline
TM
Combination Service Entrance Devices 40270-308-05
Instruction Bulletin Rev. 02, 04/2018
3
ENGLISH
Note: Tighten all electrical connections to specifications. See lug torque data
chart on combination service entrance devise wiring diagram for torque
specifications. See circuit breaker marking for lug torque specifications.
0.99
(25)
0.38
(10)
0.37
(9)
0.74
(19)
0.87
(22)
1.98
(50)
1.73
(44)
1.49
(38)
1.24
(31)
1.73
(44)
0.99
(25)
1.86
(47)
0.98
(25)
0.51
(13)
1.97
50
0.38
(10)
1.55
(39)
Figure 5: HOM Circuit Breaker Figure 6: HOMT Circuit Breaker
HOM one-pole
HOM two-pole
HOMT Tandem HOMT Quad
Dimensions: in.
(mm)
Plug-On Jaws
Mounting Hook
Bus Bar
Connection
Mounting HookBus Bar Connection (Rejects HOMT)
Wire Terminal Wire Terminal
Figure 3: HOM or HOMT Circuit Breaker Figure 4: HOM Circuit Breaker