Brochure

PowerPact H-, J-, and L-Frame Circuit Breakers
Accessories and Auxiliaries
129
02/2016
© 2011–2016 Schneider Electric
All Rights Reserved
Class 9422 Cable Operating Handle
Flange-mounted handle cable operating mechanism is for use with Class 9422 Type A handle
operators especially designed for tall, deep enclosures where placement flexibility is required.
Table 102: H- and J-Frame Component Parts
Description Catalog No.
Standard Handle Assembly
Type 1, 3R, 12 9421LH6
NEMA Type 3 and 4, Painted 9421LH46
NEMA Type 3 and 4, Chrome Plated 9421LC46
Operating Mechanism Includes Lockout 9421LJ7
Standard Shaft Support Bracket Not Required 9421LS8
Long Shaft Support Bracket Included 9421LS13
Table 103: L-Frame NEMA Door-Mounted Rotary Operated Handles
Handle Type Poles Operating Mechanism Included in Kit
Mounting Depth
Min–Max
Kit Number
Painted 6 in. 3
9421LS8 and 9421LC46
7-1/4 to 12-1/16 in.
(184 to 306 mm)
9421LD1
9421LS13 and 9421LH46
7-1/4 to 22-5/8 in.
(184 to 575 mm)
9421LD4
F
Applications
• The cable operator maintains:
Suitability for isolation
Indication of three positions: O (OFF), I (ON) and tripped
Access to push-to-test
• The circuit breaker may be locked in the off position by one to three padlocks
• Door can be locked closed due to interlocking features of the handle operator
Installation
• Handle is mounted on flange of enclosure using specified mounting dimensions while circuit breaker and
operating mechanism are mounted to inside of enclosure using two screws
• Cable lengths available in 3-, 5- or 10-foot lengths to accommodate a variety of mounting locations
Handles are available in painted NEMA 1, 3, 3R, 4 (sheet steel) and 12 ratings or chrome (NEMA 4, 4X)
Table 104: Class 9422 Cable Operating Mechanisms and A1 Handles
Description
H- and J-Frame
Kit Number
L-Frame
Kit Number
Cable Mechanism
Length
36 in. (914 mm) 9422CSF30 9422CSJ30
60 in (1524 mm) 9422CSF50 9422CSJ50
84 in. (2134 m) 9422CSF70 —
120 in. (3048 mm) 9422CSF10 9422CSJ10
A1 painted flange handle — 9422A1
Operating Mechanism Only — 9422RSI
1.44
(37)
9.12
(232)
4.25
(108)
4.69
(119)
1.00
(25)
C
A
B
X
E
D
Refer to NEC Article 430-10 for minimum dimension X from
circuit breaker top mounting hole to wall or barrier to ensure
adequate wire bending space.
Note: Bend radius in cable must never be less than 6 in.
(152 mm). Electrical clearances must be maintained between
cable and live electrical parts.
in.
(mm)
Dimensions: