Specification

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Oct 8, 2020
1
Product data sheet
Characteristics
HEPD80
SPD, HEPD type 1, 120/240 V, 1 PH, 3 wire,
80 kA
Main
Product Surge protection device
Surge Arrester Type Electrical distribution network
Range Square D
Device Short Name HEPD
Accessory Category Mounting accessory
Complementary
Surge Current 80kA per phase
Voltage Rating 120/240 V AC
Number of Phases 1 phase
Wiring Configuration 3-wire (isolated ground)
Connection Wire AWG 14
MCOV 150V
Nominal Discharge Current 10kA
Rated Current 10kA
SCCR 25kA
Local Signalling 1 LED green normal operation
1 LED green off
Mounting Location Side
Mounting Support Bracket
Product destination Load center
Input voltage 600 V L-N
600 V L - G
1000 V L - L
900 V N - G
Height 3.23in (82.04mm)
Width 3.72in (94.49mm)
Depth 2.10in (53.34mm)
Cable length 34in (863.60mm)
Environment
Enclosure Rating NEMA 4X
Enclosure Material non-metallic
Standards UL 1449
CUL
UL 1449:ed. 4 type I
Ambient Operating -40…149°F (-40…65°C)