Brochure

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors
Selection
53
6/2010
© 2001–2010 Schneider Electric
All Rights Reserved
Direct Rotary Handle
The direct rotary handle accessory replaces the front cover of the starter and is secured by screws.
Refer to Figure 6 on page 52. The handle includes a device for padlocking the starter in the Off (O)
position. As many as three padlocks with a shank diameter of 5–8 mm (0.2–0.3 in.) can be used. The
padlocks are not supplied. The conversion accessory allows the direct rotary handle to be mounted on
an enclosure door. This accessory is designed to prevent the opening of the door when the manual
motor starter is in the ON position.
Extended Rotary Handle
The extended rotary handle makes it possible for a door-mounted rotary handle to operate controllers
installed on the inside back panel of an enclosure. Refer to Figure 6 on page 52. The extended rotary
handle consists of the following:
— a unit that screws onto the front cover of the starter
— an assembly (handle and front plate) that fits on the enclosure door
— an extension shaft which must be adjusted according to the distance between the mounting
surface and the door: 185 mm (7.28 in.) minimum, 600 mm (23.62 in.) maximum
The extended rotary handle includes a device for padlocking the starter in the Off (O) position. As
many as three padlocks with a shank diameter of 5–8 mm (0.2–0.3 in.) can be used. The padlocks are
not supplied. Using the padlocks prevents the enclosure door from being opened.
Locking Device
The locking device allows controllers with no rotary handle installed to be padlocked in the Off (O)
position. As many as three padlocks with a shank diameter of 5–8 mm (0.2–0.3 in.) can be used. The
padlocks are not supplied. Refer to Figure 6 on page 52.
Environment
Table 64: Direct Rotary Handle
Description Type Catalog Number Weight, lb (kg)
Direct rotary handle
Black handle, black legend plate GV7AP03
0.45 (0.205)
Red handle, yellow legend plate GV7AP04
Conversion accessory
For mounting the direct rotary handle
onto the enclosure door
GV7AP05 0.22 (0.100)
Table 65: Extended Rotary Handle
Description Type Catalog Number Weight, lb (kg)
Extended rotary handle
Black handle, black legend plate GV7AP01
1.71 (0.775)
Red handle, yellow legend plate GV7AP02
Table 66: Locking Device
Description Application Catalog Number Weight, lb (kg)
Locking device GV7 starters without a rotary handle GV7V01 0.22 (0.100)
Table 67: IP Ratings for Manual Motor Starters
Type GV2ME GV2P GV3P GV3ME80 GV7R
Degree of protection
Conforming to IEC 60529
open mounted
IP20 IP20 IP20 IP20
IP405 with
terminal shrouds