Brochure

GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors
Selection
49
6/2010
© 2001–2010 Schneider Electric
All Rights Reserved
GV7 Accessories
Standard manual controllers and protectors include terminal- and device-mounting hardware. Select
cable clamps and accessories from Table 59.
I
GV7AC01
GV7AC03
GV7AC02
GV7AC04
GV7RE, RS
GV7AC01
GV7AC04
Table 59: Cabling Accessories
Description Application
Sold in
Lots of
For Contactor
Catalog
Number
Weight,
lb (kg)
Box lugs
GV7R•40 through GV7R•150: 14–3/0 AWG (1.5–95 mm
2
)3— GV7AC021 0.66 (0.300)
GV7R•220: 14 AWG–350 mcm (1.5–185 mm
2
)3— GV7AC022 0.77 (0.350)
Phase Barriers, Busbars, and Shrouds
Terminal extension kit Increases the centerline distance between phases to 45 mm 3 — GV7AC03 0.40 (0.180)
Terminal shroud kit
[1]
Covers the terminal connections; is finger safe per IEC 60529 1 — GV7AC01 0.28 (0.125)
Phase barriers
[1]
Provides maximum phase separation at the connection points 2 — GV7AC04
0.17 (0.075)
Insulating barriers Provides insulation between the connections and the backplate 2 — GV7AC05
Busbars and covers
[2]
Provides a direct link between the GV7 manual motor starter and the contactor. The cover protects against direct finger contact.
Connect to LC1F115–185 contactor 1 LC1F115 to F185 GV7AC06
1.21 (0.550)
Connect to LC1F225–265 contactor
1 LC1F225 and F265 GV7AC07
Connect to LC1D115–150 contactor
1 LC1D115 and D150 GV7AC08
1
Terminal shields cannot be used together with phase barriers.
2
The kit contains links, a protective shield, and an adjustable-depth metal bracket for the protector.