Brochure
© 2001–2010 Schneider Electric
All Rights Reserved
GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors
Selection
42
6/2010
Table 52: Electrical Trip Units
Description Voltage Hz Catalog No.
[1]
1
To order an undervoltage trip unit: replace the bullet (•) with a U, for example: GVAU025.
To order a shunt trip unit: replace the bullet (•) with an S, for example: GVAS025.
Weight, lb (kg)
Undervoltage or shunt trip units
Side
1 block on right
of GV2 or GV3 controllers
24
50
GVA
•
025
0.23 (0.105)
60
GVA
•
026
48
50
GVA
•
055
60
GVA
•
056
100 50 GVA•107
100–110 60 GVA•107
110–115
50 GVA•115
60 GVA•116
120–127 50 GVA•125
127 60 GVA•115
200 50 GVA•207
200–220 60 GVA•207
220–240
50 GVA•225
60 GVA•226
380–400
50 GVA•385
60 GVA•386
415–440 50 GVA•415
415 60 GVA•416
440 60 GVA•385
480 60 GVA•415
500 50 GVA•505
600 60 GVA•505
Undervoltage trip unit, conforming to INRS (can only be mounted on GV2ME)
Safety device for dangerous machines, conforming to INRS and VDE 0113
Side
1 block on right
GV2ME controllers
110–115
50 GVAX115
0.24 (0.11)
60 GVAX116
127 60 GVAX115
220–240
50 GVAX225
60 GVAX226
380–400
50 GVAX385
60 GVAX386
415–440 50 GVAX415
440 60 GVAX385
Table 53: Add-on Contact Blocks
Description Mounting Location Max. No. of Blocks Catalog No. Weight, lb (kg)
Visible isolation block
[1]
1
Provides visible isolation of the 3 poles upstream of the GV2P controller.
Front
[2]
2
The mounting location of a GV2AK00 visible isolation block on a GV2P controller (refer to Figure 1 on page 40).
1 GV2AK00 0.33 (0.150)
Limiters
At top (GV2ME and GV2P) 1 GV1L3 0.29 (0.130)
Independent 1 LA9LB920 0.70 (0.320)
Table 54: Fuse Holder, 30 A Maximum
For Use In Terminal Description For Fuse Type Sold in
Lots of
Catalog
Number
Weight,
lb (kg)
US Markets
Screw clamp, 3-pole CC, KTK-R 0.41 x 1.5 (10.3 x 38 mm) 1 LS1D30
0.23 (0.50)
Spring, 3-pole CC, KTK-R 0.41 x 1.5 (10.3 x 38 mm) 1 LS1D303
European Markets
Screw clamp, 3-pole aM, gG 0.39 x 1.5 (10 x 38 mm) 1 LS1D32
Spring, 3-pole aM, gG 0.39 x 1.5 (10 x 38 mm) 1 LS1D323