Install Instructions

2/2
NNZ8205001
© 2016 Schneider Electric - All rights reserved.
Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F - 92506 Rueil Malmaison Cedex
www.schneider-electric.com
WARNING
RISK OF FIRE OR ELECTRIC SHOCK (FOR CONTACTOR WITH UL HI-FAULT
SHORT CIRCUIT CURRENT RATINGS ONLY)
 The opening of the branch-circuit protective device may be an indication that a fault
current has been interrupted.

the controller should be examined and replaced if damaged.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION,OR ARC FLASH
Disconnect all power before servicing equipment.
Failure to follow these instructions will result in death or serious injury.
"For Motor Starting Use Schneider Electric Overload Relay".
AC/DC: - use of this product in EMC environment B may require mitigation
measures to avoid unwanted disturbance.
- full open AC at 10%Us