Technical Data Bulletin

Class 3100 General Duty Safety Switches
Fuse Puller Kits
Fuse Puller Kit
Series F Switches
Only
The Fuse Puller kits consist of three fuse pullers as required for a three-pole, fusible,
60 or 100 A general duty switch. Kits can be field installed into 60 or 100 A, Series F
switches.
Table 3 - Fuse Puller Kits
Switch Ampere Rating
Series Number
Fuse Puller Kit
Catalog Number
60 F FPK03
100 F FPK0610
Equipment Grounding Kits
Grounding Kits
30 and 60 A
PK3GTA1
100 A
GTK0610
200 A
PKOGTA2
• Aluminum or copper conductors
• Field-installed
Table 4 - Equipment Grounding Kits
Switch Ampere
Rating
Catalog Number Lug Wire Range AWG
30
2
Std.
(1) 14 – 10 Cu or (1) 12 – 8 Al
30 PK3GTA1
(3) 14–4 Cu or (3) 12–4 Al or (6) 14–12 Cu
or (6) 12–10 Al
60
3
GTK03
(2) 14–4 Cu or (2) 12–4 Al (4) 14–12 Cu
or (4) 12–10 Al
100 GTK0610
(2) 14–1/0 Cu or (2) 12–1/0 Al (2) 14–6 Cu
or (2) 12–6 Al
200 PKOGTA2
(2) 10–2/0 Cu or (2) 6–2/0 Cu Al
400, 600
PKOGTA2
4
(2) 10–2/0 Cu or (2) 6–2/0 Cu Al
800 PKOGTA3
(6) 6–3/0 Al/Cu Max.
8 3100CT1602
2. Light duty safety switches.
3. 60 A non-fusible switches accept PK3GTA1.
4. Two are required if the ground conductors are run in parallel.