Technical Data Bulletin
Table Of Contents
- Enclosed Safety Switches
- Catalog Number Description
- General Duty Safety Switches
- Catalog Number Description
- Heavy Duty Safety Switches
- Product Description
- Enclosures
- Special Application Enclosures
- Accessories
- Rainproof Bolt-On Hubs
- Watertight Hubs
- Solid Neutral Assemblies HDSS
- Equipment Grounding Kits
- Cover Viewing Window
- Electrical Interlock Kits HDSS
- Class R Fuse Kits
- Fuse Puller Kits
- Copper Lug Kits
- Double Lug Kits
- Compression Lug Kits: 800 A and 1200 A Safety Switches
- Key Interlock System
- Lock-Off Guard Kits
- Lock-ON Provisions
- Internal Barrier Kits
- Special Paint
- Voltage Monitors
- Phenolic Legend Plate
- Switch Lubricant
- General Information
Class 3100 Heavy Duty Safety Switches
Table 29 - Equipment Grounding Kits and Terminal Data
Amperes
67 68
Series
69
Catalog Number
Terminal Data AWG/kcmil
Optional
Copper Only
Catalog
Number
Terminal Data
AWK/kcmil
30 F5–F6
GTK03
70
(2) 14–4 Cu or (2) 12–4 Al
or (4) 14–12 Cu or (4) 12–10 Al
GTK03C
70 71
(2) 14–6 Cu
60
F5–F6 (600 V)
GTK0610
(2) 14–1/0 Cu or (2) 12–1/0 Al and
(2) 14–6 Cu or (2) 12–6 Al
GTK0610C
(2) 14–1/0 Cu
and
(2) 14–6 Cu
60
F5–F6 (240V)
GTK03
(2) 14–4 Cu or (2) 12–4 Al or
(4) 14–12 Cu or (4) 12–10 Al
GTK03C
(2) 14–6 Cu
100 F5–F6 GTK0610
(2) 14–1/0 Cu or (2) 12–1/0 Al and
(2) 14–6 Cu or (2) 12–6 Al
GTK0610C
(2) 14–1/0 Cu
and
(2) 14–6 Cu
200 F5–F6 PKOGTA2
(2) 10–2/0 Cu or (2) 6–2/0 Al
PKOGTC2
(2) 14–4 Cu
400 and 600 E4–E5
PKOGTA2
72
(2) 10–2/0 Cu or (2) 6–2/0 Al
PKOGTC3
(4) 14–1/0 Cu
800 E4 PKOGTA7
(4) 4–350 Al/Cu
— —
1200 E4 PKOGTA8
(8) 4–350 Al/Cu
— —
Cover Viewing Window
Cover Viewing
Window
The optional cover viewing window is positioned over the blades to allow visual
verification of the ON-OFF status. Available on 30 through 1200 A heavy duty
switches.
• UL Listed
• Factory installed only
• Add a VW suffix to the catalog number for factory installation
• Not available on NEMA Type 4X fiberglass reinforced polyester, Krydon
TM
or
NEMA Type 7/9 enclosures
32 3100CT1602
67. For series not shown in chart refer to the switch wiring diagram.
68. Equipment ground kits (Al/Cu) are factory installed standard in 30–200 A Series F NEMA Type 4/4X/5 (stainless steel), 12 and 12K.
Equipment ground kits are standard factory installed on all receptacle switches and all enclosure Series F 30–200 A, four- and six-pole
switches.
69. See page 57 through page 61 for safety switch series.
70. H2212AWK accepts GTK03 or GTK03C. H3612A or AWK accepts GTK03C. H3612 and H3612RB accepts GTK0610. HU3612AWK accepts
GTK03C. HU3612A accepts GTK0610C. HU3612RB accepts GTK0610 or GTK0610C.
71. Optional copper equipment grounding kit for the four- and six-pole 30 A F Series: H461DS, H461AWK, HU461DS, HU661DS and
HU661AWK accepts GTK03C. HU461AWK accepts GTK0610C.
72. Two required if equipment grounding conductors are run in parallel.