User Guide
Table Of Contents
- Altivar Machine ATV320
- Table of Contents
- Safety Information
- About the Book
- Introduction to Device Conversion Function
- Control Block Terminals
- Functions Compatibilities
- Applicative Functions
- Reverse
- Reverse Inhibition
- Speed Loop Parameters
- Macro-Configurations
- I/O Multi-Assignments
- 2/3 Wires Control
- Freewheel Stop
- Fast Stop
- Ramp Types
- Ramp Switching
- Ramp Auto-Adaptation
- DC Injection Braking
- Reference Switching
- Separate Mode (Command & Reference)
- Reference Operation
- Jog
- Preset Speeds
- Brake Control Sequence
- +/- Speed
- 2nd Current Limitation
- Jump Frequency
- PID Regulator
- Internal PID reference
- Preset PID Reference
- Sleep / Wake-Up
- Catch On the Fly
- Automatic Restart
- Multi-Motors / Multi-Configurations
Function Compatibilities
26
QGH39563 02/2017
Reverse
Overview
This function is available in both ATV312 and ATV320 drives
In factory settings, the reverse function [Reverse Assign] RRS is set to the [DI2] LI2 on both products.
Device Conversion
Conversion from an ATV312 configuration into ATV320 configuration is supported for this function.
Reverse Inhibition
Overview
This function is available in both ATV312 and ATV320 drives but the parameters are not the same
On ATV312, this function is set using the [Rotating direction] ROT
?
parameter.
On ATV320, this function is set using the [Reverse Disable] RIN
?
parameter.
Device Conversion
Conversion from an ATV312 configuration into ATV320 configuration is not supported for this function.
For more information about Reverse Inhibition, refer to the ATV320 Programming Manual (
NVE41295
).
Speed Loop Parameters
Overview
This function is available in both ATV312 and ATV320 drives but the parameters are not the same
These parameters have an effect on the drives performances.
Device Conversion
Conversion from an ATV312 configuration into ATV320 configuration is not supported for this function.
The parameters related to this function are set to factory setting values and needs to be adjusted
depending on the application.
For more information about Speed Loop Parameters, refer to the ATV320 Programming Manual
(
NVE41295
).