User Guide

Function Compatibilities
24
QGH39563 02/2017
Applicative Functions
Introduction
ATV320 offers similar applicative functions compare to ATV312.
ATV320 offers also additional functions like functional safety, ATV Logic, and so on
For more information about the ATV320 functions, refer to the ATV320 Programming Manual (
NVE41295 ).
List of Functions
NOTE: Some functions available on both products can have minor differences and cannot be converted;
this will be detailed on next pages.
The table provides the summary of the functions available in ATV312 and ATV320
WARNING
UNANTICIPATED EQUIPMENT OPERATION
Device conversion function is used to apply the configuration from a drive product range to another drive
product range. However, the values of certain parameters cannot be applied because the functional
behaviors of the source drive and the target drive are different.
The parameters whose values cannot be applied are kept to the factory settings.
 Consult the programming manual for the parameters that are kept to their factory settings and select
appropriate values for these parameters.
 Do not operate the product with unknown or unsuitable settings or data.
 Perform a comprehensive commissioning test.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
Function ATV312 ATV320 Conversion
Reverse ✓ ✓ Yes
Reverse Inhibition ✓ ✓ No
Speed Loop Parameters ✓ ✓ No
Macro-configurations ✓ ✓ No
I/O multi-assignment ✓ ✓ Yes
2/3 wires control ✓ ✓ Yes
Freewheel stop ✓ ✓ Yes
Fast stop ✓ ✓ Yes
Ramp types ✓ ✓ Yes
Ramp switching ✓ ✓ Yes
Ramp auto-adaptation ✓ ✓ Yes
DC injection braking ✓ ✓ Yes
Reference switching ✓ ✓ No
Separate mode (command & reference) ✓ ✓ No
Reference operation ✓ ✓ Yes
Jog ✓ ✓ Yes
Preset Speeds ✓ ✓ Yes
Brake control sequence ✓ ✓ No
High-speed hoisting – ✓ –
Rope slack – ✓ –
External weight measurement – ✓ –
+/- Speed ✓ ✓ Yes
+/- Speed around reference – ✓ –
2nd Current limitation ✓ ✓ Yes
Torque limitation – ✓ –
Master/slave – ✓ –
Jump frequency ✓ ✓ Yes