User Guide
Table Of Contents
- Altivar Machine ATV320
- Table of Contents
- Safety Information
- About the Book
- Introduction to Device Conversion Function
- Control Block Terminals
- Functions Compatibilities
- Applicative Functions
- Reverse
- Reverse Inhibition
- Speed Loop Parameters
- Macro-Configurations
- I/O Multi-Assignments
- 2/3 Wires Control
- Freewheel Stop
- Fast Stop
- Ramp Types
- Ramp Switching
- Ramp Auto-Adaptation
- DC Injection Braking
- Reference Switching
- Separate Mode (Command & Reference)
- Reference Operation
- Jog
- Preset Speeds
- Brake Control Sequence
- +/- Speed
- 2nd Current Limitation
- Jump Frequency
- PID Regulator
- Internal PID reference
- Preset PID Reference
- Sleep / Wake-Up
- Catch On the Fly
- Automatic Restart
- Multi-Motors / Multi-Configurations
Control Block Terminals
QGH39563 02/2017 19
Digital Outputs
Characteristics
The table provides the characteristics of digital outputs of ATV312 and ATV320 devices
For more information about wiring of digital output, refer to the ATV320 Installation Manual (
NVE41289
).
Digital Outputs Characteristics
ATV312 ATV320 ATV312 ATV320
AOC DQ+, DQ- Can be configured as 24 Vdc logic output
on AOC, min. load impedance 1.2 kΩ
Open collector output configurable as sink or
source using SW1 switch.
Refresh time: 2 ms
Maximum voltage: 30 Vdc
Maximum current: 100 mA