User Guide

Introduction to Device Conversion Function
14
QGH39563 02/2017
Conversion of Device Configuration
The table provides the procedure to convert the device configuration
Step Action Comments
1 On the SoMove start page, do one of the following
 Click the Device Conversion button
 Press CTRL + ALT + Q keys, on the menu bar, click
File →Device Conversion
Result: Opens Device Conversion dialog box
2
In the Device Conversion dialog box
1. Click the button in the Source zone
Result: Opens the Select device configuration dialog
box
2. In the Select device configuration dialog box, select the
configuration file (
.psx ) you wish to convert and then
click Open
3. Select the target device in Select Target DTM box
4. Click Convert
Result: Opens Select Target Device Reference dialog box
NOTE:
 The Source zone displays the path and the
device type of selected configuration.
 The Target zone allows you to select the
device to which the selected configuration file
is converted
3 In the Select Target Device Reference dialog box, select
the target device reference in the Reference box and click
OK
Result: Opens the Conversion Result and Limitations
dialog box
4
In the Conversion Results and Limitations dialog box, click
Continue.
Result: Displays the UNANTICPATED EQUIPMENT
OPERATION message
The Conversion Results and Limitation dialog
box, displays the result and limitations of device
conversion operation. It consists of six columns
 Function name: Displays the name of the
function
 Source Param: Displays the parameter related
to the source device
 Source Param Value: Displays the values of
the parameters related to source device
before conversion.
 Target Param: Displays the parameters
related to the target device.
 Target Param Value: Displays the value of the
parameters related to the target device after
conversion.
 Remark: Displays the remark related to the
conversion of the individual parameters.
NOTE:
 To save the conversion results and limitations
(
.txt format), click the Save button.
 To stop the device conversion operation, click
the Cancel button
 To open the device conversion manual, click
the Help button.
5 Read the message carefully and then click OK
Result: Opens the target device DTM with the converted
configuration