Brochure
© 2019 Schneider Electric
All Rights Reserved
26-19
schneider-electric.us
Altivar
TM
71
AC Drives Selection Tables
Panel Mounted / Open AC Drive Solutions
Altivar™ 71 Single-Phase
In an application where it is necessary to use a 240 V single-phase input for a 3-phase
motor, the drive must be derated; therefore, the power listed on the drive nameplate will
be higher than the power rating on the motor nameplate.
For more information on wire and line reactor sizing, refer to Altivar 61 and 71
Supplementary Ratings (30072-451-38).
Table 26.15: Altivar 71 Selection
Input
Line
Voltage
With A 3% Line Reactor Without A 3% Line Reactor
Catalog Number
with LCD Keypad [16]
Catalog Number
for ATV71 and Type 1 conduit
entry kit shipped as
one line item. Field installation
required
(packaged as kit at
warehouse).
Catalog Number
with LED
Keypad
(Non-stocked)
Motor
Power
Continuous
Output
Current
Motor Power
Continuous
Output Current
HP kW A HP kW A
208/
240 Vac
Single
Phase
— — — 0.5 0.37 3
ATV71H075M3 [17]
ATV71H075M3T1
ATV71H075M3Z [17]
— — — 1 0.75 4.8
ATV71HU15M3 [17]
ATV71HU15M3T1
ATV71HU15M3Z [17]
— — — 2 1.5 8
ATV71HU22M3 [17]
ATV71HU22M3T1
ATV71HU22M3Z [17]
— — — 3 2.2 11
ATV71HU30M3 [17]
ATV71HU30M3T1
ATV71HU30M3Z [17]
— 3 13.7 — — —
ATV71HU40M3 [17]
ATV71HU40M3T1
ATV71HU40M3Z [17]
5 4 17.5 — — —
ATV71HU55M3 [17]
ATV71HU55M3T1
ATV71HU55M3Z [17]
7.5 5.5 27.5 5 4 17.5
ATV71HU75M3 [17]
ATV71HU75M3T1
ATV71HU75M3Z [17]
10 7.5 33 7.5 5.5 27.5
ATV71HD15M3X [17] [18] ATV71HD15M3XT1 [18] ATV71HD15M3XZ [17]
— — — 10 7.5 33
ATV71HD18M3X [17] [18] ATV71HD18M3XT1 [18]
—
15 11 54 — — —
ATV71HD22M3X [17] [18] ATV71HD22M3XT1 [18]
—
20 15 66 15 11 54
ATV71HD30M3X [17] [18] ATV71HD30M3XT1 [18]
—
25 18 75 20 15 66
ATV71HD37M3X [17] [18] ATV71HD37M3XT1 [18]
—
30 22 88 25 18 75
ATV71HD45M3X [17] [18] ATV71HD45M3XT1 [18]
—
26
AC DRIVES AND SOFT STARTERS
[16] These products can be ordered with LonWorks
®
or BACnet communication option card shipped as one line item. Field installation required. Add “LW” to the end of the part number to receive
a LonWorks option card. Add “BN” to the end of the partnumber to receive a BACnet option card.
[17] Option to have product treated for increased protection for dusty and corrosive environments. This product is not stocked. On 0.5 hp to 5 hp at 230 Vac single phase, add “S337” to the end
of the catalog number. On 7.5 hp to 25 hp at 230 Vac single phase, add “337” to the end of the catalog number. With this option, exposed copper is tinned, circuit boards are conformal
coated in critical areas and plastics are treated to better withstand the corrosive nature of certain oils.
[18] Product does not contain an EMC filter.