Product Overview

Speed range 1…10
Speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn
Torque accuracy +/- 15 %
Transient overtorque 120% of nominal motor torque +/- 10 % 60 s
Asynchronous motor control profile Voltage/frequency ratio - Energy Saving, quadratic U/f
Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio, 2 points
Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard
Regulation loop Adjustable PI regulator
Motor slip compensation Automatic whatever the load
Adjustable
Not available in voltage/frequency ratio motor control
Local signalling DC bus energized 1 LED red)
Output voltage <= power supply voltage
Isolation Electrical between power and control
Type of cable Without mounting kit 1 IEC cable 113°F (45°C), copper 90 °C / XLPE/EPR
Without mounting kit 1 IEC cable 113°F (45°C), copper 70 °C / PVC
With UL Type 1 kit 3 UL 508 cable 104°F (40°C), copper 75 °C / PVC
Electrical connection VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.00in² (2.5mm²) / AWG 14
L1/R, L2/S, L3/T terminal 0.01in² (6mm²) / AWG 10
Tightening torque 11.51lbf.in (1.3N.m), 11.5 lb.in L1/R, L2/S, L3/T)
5.31lbf.in (0.6N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
Supply Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10A overload and
short-circuit protection
Internal supply 24 V DC 21…27V), <200A overload and short-circuit protection
Analogue input number 2
Analogue input type VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits
VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits
VIB configurable PTC probe 0...6 probes 1500 Ohm
VIA switch-configurable current 0...20 mA 250 Ohm 10 bits
Sampling duration 2ms +/- 0.5 ms F discrete
2ms +/- 0.5 ms R discrete
2ms +/- 0.5 ms RES discrete
3.5ms +/- 0.5 ms VIA analog
22ms +/- 0.5 ms VIB analog
Response time FM 2 ms +/- 0.5 ms analog
FLA, FLC 7 ms +/- 0.5 ms discrete
FLB, FLC 7 ms +/- 0.5 ms discrete
RY, RC 7 ms +/- 0.5 ms discrete
Accuracy +/- 0.6 % VIA) for a temperature variation 60 °C
+/- 0.6 % VIB) for a temperature variation 60 °C
+/- 1 % FM) for a temperature variation 60 °C
Linearity error VIA +/- 0.15 % of maximum value input
VIB +/- 0.15 % of maximum value input
FM +/- 0.2 % output
Analogue output number 1
Analogue output type FM switch-configurable voltage 0...10 V DC 7620Ohm 10 bits
FM switch-configurable current 0...20 mA 970Ohm 10 bits
Discrete output number 2
Discrete output type Configurable relay logic FLA, FLC) NO - 100000cycles
Configurable relay logic FLB, FLC) NC - 100000cycles
Configurable relay logic RY, RC) NO - 100000cycles
Minimum switching current 3mA 24 V DC configurable relay logic
Maximum switching current 5A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)
5A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)
2A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R)
2A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
Discrete input type F programmable 24 V DC level 1 PLC 4700 Ohm
R programmable 24 V DC level 1 PLC 4700 Ohm
RES programmable 24 V DC level 1 PLC 4700 Ohm
Discrete input logic Positive logic (source) F, R, RES), <= 5 V, >= 11 V
Negative logic (sink) F, R, RES), >= 16 V, <= 10 V
2