Install Instructions
Table Of Contents
- Table of Contents
- Safety Information
- About the Book
- Before You Begin
- Steps for Setting Up
- Upstream Protective Device
- Technical Data
- Installation
- Drive mounting generalities
- Specific recommendations for mounting in an enclosure
- Position of the charging LED
- Opening the drive to access terminals
- Wiring recommendations
- Power terminals
- Control terminals and switches
- Installing option card
- Use on an impedance grounded (IT) system
- Electromagnetic compatibility (EMC)
- Checking the Installation
- Recommended branch circuit protection devices
- Maintenance
- Migration ATV21 --> ATV212
78 S1A53832 03/2019
Generalities
The ATV212 is compatible with the ATV21 (latest version), nevertheless some differences exist between both
drives.
Differentiating points
Power part
The power connections are identical to that of ATV21
Control part overview
The control terminals are arranged and marked differently.
Furthermore ATV21 used to offer 5 different cards:
a standard I/O card,
4 dedicated cards for BACnet, Metasys N2, APOGEE and LONWORKS fieldbuses.
ATV212 offers:
as standard a communication card intended to Modbus, BACnet, Metasys N2 and APOGEE FLNP1
fieldbuses,
a LONWORKS option card.
Switches
ATV21 Standard I/O
ATV212 Modbus BACnet, Metasys N2, APOGEE
Selection of logic type SW4 Selection of logic type SW102
FM voltage/ current selection SW2 FM voltage/ current selection SW101
ATV21 BACnet, Metasys N2, APOGEE
ATV212 Modbus BACnet, Metasys N2, APOGEE
Selection of logic type
SW2
Selection of logic type SW102
VIB function VIB function SW100
Selection of communication terminal resistor SW4
Selection of communication terminal
resistor
SW103
ATV21 LONWORKS ATV212 LONWORKS
Selection of logic type
SW1
Selection of logic type
SW100
VIB function VIB function