Pressure, Vacuum, and Float Switches Pressure, Vacuum, and Float Switches Selection Guide 9012 Sensor Selections 9013, 9036, 9037, 9038 Sensor Selections Electronic Pressure Sensors XMLG Electronic Pressure Sensors XMLK XMLR 9012G Machine Tool Pressure Switch XMLA, XMLB, XMLC, XMLD Industrial Pressure Switches XMLA, XMLB, XMLC, XMLD Dimensions Industrial, Type G Machine Tool, Type G Pressure Switches and Vacuum Switches Class 9012 and 9016 Electrical Ratings and Dimensions Pressure Switches Class 901
Pressure, Vacuum, and Float Switches Selection Guide 22 Class 9012 / Refer to Catalog 9012CT9701 or 9014CT0201 schneider-electric.
Selection Guide Pressure, Vacuum, and Float Switches Class 9013, 9036, 9037, 9038 / Refer to Catalog 9013CT9701 or 9034CT9701 PRESSURE, VACUUM, AND FLOAT SWITCHES schneider-electric.
Electronic Pressure Sensors XMLG Pressure Transmitters Refer to Catalog 9014CT0201 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XMLG Pressure Transmitters XMLG pressure transmitters are characterized by their ceramic pressure-measuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics, providing an analog output signal. Table 22.
XMLG Pressure Transmitters Electronic Pressure Sensors Class 9049 / Refer to Catalog 9014CT0201 PRESSURE, VACUUM, AND FLOAT SWITCHES schneider-electric.us XMLG Pressure Transmitters and Switches For connectors and cables, see page 22-12. Table 22.5: Dimensions, in. (mm) XMLGpppDpp, M12 x 1 Connection G 1/4 A (BSAP Male) 1/4" NPT Male 7/16-20 UNF Male 12 (0.47) 8 (0.31) 22 Ø 22.8 (0.90) Ø 18.8 ± 0,1 (0.74) SW 21 (0.83) A Dimension A XMLG•••D2••1 XMLG•••D2••3 XMLG•••D2••7 56 (2.20) 2.1 (0.
XMLP Pressure Transmitters Electronic Pressure Sensors Refer to Catalog DIA4ED2150102EN 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Compact Metal Body, 316L Stainless Steel Fluid Entry, with Analog Output Fluid Connection: 1/4"-18 NPT (male) Table 22.7: –14.
XMLP Pressure Transmitters Electronic Pressure Sensors Table 22.14: 0 to 150 psi (0 to 10.3 bar) Maximum permissible accidental pressure: 450 psi, destruction pressure: 900 psi Analog output type Catalog Number Electrical connection XMLP150PD230 [6] M12 4–20 mA Packard Metri-Pack 150 XMLP150PP230 M12 XMLP150PD730 0–10 V Packard Metri-Pack 150 XMLP150PP730 0.5–4.5 V ratiometric M12 XMLP150PD130 XMLP••0PD•30 Weight, kg (lb) 0.088 (0.194) 0.090 (0.198) 0.088 (0.194) 0.090 (0.198) 0.088 (0.194) Table 22.
Electronic Pressure Sensors 22 XMEP Pressure Transmitters for Mobile Equipment Refer to Catalog DIA4ED2150102EN schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES With Analog Output Fluid Connection: 1/4"-18 NPT (male) Table 22.22: 0 to 1000 psi (0 to 69 bar) Maximum permissible accidental pressure: 2200 psi, destruction pressure: 4400 psi Analog output type Catalog Number Electrical connection 4–20 mA 0–10 V 0.5–4.
XMLK Pressure Transmitters Electronic Pressure Sensors XMLK Pressure Transmitters Type XMLK pressure transmitters are characterized by their ceramic pressuremeasuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics to provide an analog output signal. Table 22.
Electronic Pressure Sensors XMLK Pressure Transmitters and Switches Class 9049 / Refer to Catalog 9014CT0201 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XMLK Dimensions For connectors and cables, see XMLF Accessories, Wiring Configurations, and Electrical Connections, page 22-12. Table 22.30: Dimensions XMLK, DIN connector NPT 1/4-18 NPT G 1/4 A (male) Ø 36 1.417 86 3.386 8.7 .343 Ø 36 1.417 Dimensions = mm / in. G 1/4 12.7 0.5 Ø 18.8 (± 0,1) .740 SW19 2.5 .098 56.8 2.
XMLR Pressure Switches Electronic Pressure Sensors schneider-electric.us XMLR and ZMLP Pressure Switches XMLR and ZMLP are user-friendly electronic pressure switches with an easy-to-read four digit display and finger-operated adjustment buttons for scrolling up and down through the menu functions. Burst pressure is six times the nominal pressure (up to 1,800 bar or 26,100 psi). Configurable functions: Display • Pressure unit of measurement ( bar, psi, kPa, or MPa).
Electronic Pressure Sensors XMLR Pressure Switches Refer to Catalog 9014CT0201 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XMLR Accessories, Wiring, and Electrical Connections Table 22.36: Accessories Description For use with Cooler with G 1/4 A (male) connections Usage temperature: 150° C (302° F) max. for the fluid, 50°C (122° F) for the ambient air Fixing bracket aluminium XMLZL017 Weight kg (oz) Catalog Number XMLR●●●●●●●5 XMLZL009 0.370 (13.051) XMLR●●● XMLZL017 0.
Refer to Catalog 9012CT9701 schneider-electric.us XML Industrial Pressure Switches XMLB XML industrial pressure switches meet IEC, Cenelec, UL, and CSA standards. They are CE marked. • Fixed differential (XMLA), adjustable differential single-pole (XMLB) or double-pole (XMLC), and dual stage (XMLD) • Range listed is on increasing pressure (psi, bar, kPa) • External pressure setting window available • 1 N.O.–1 N.C.
Pressure Switches 22 XMLA, XMLB, XMLC, XMLD Industrial Pressure Switches Class 9049 / Refer to Catalog 9012CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XML Catalog Numbers and Accessories Table 22.
XMLA, XMLB, XMLC, XMLD Dimensions Pressure Switches Class 9049 / Refer to Catalog 9012CT9701 PRESSURE, VACUUM, AND FLOAT SWITCHES schneider-electric.us XML Dimensions XMLAM01, XMLBM05, XMLCM05, XMLA004, X•ML010…500 XMLC / D: 46 XMLA / B: 75 XMLA / B: 35 5 17.5 37 37 22 (2) 113 XMLC / D: 85 23 (1) = 20-22 = 56 120 (1) 1 fluid entry, tapped G 1/4 (BSP female) or 1/4” NPT (2) 1 electrical connections entry, tapped M20 x 1.5 or Pg 13.5, or 1/2” NPT Ø: 2 elongated holes Ø 5.2 x 6.
Pressure Switches Industrial, Type G 22 Class 9012 / Refer to Catalog 9012CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Class 9012 Type G Pressure Switches Table 22.45: Fixed Differential, Open Type or NEMA 1 Enclosure NEMA 1 Open Type Open Type Range On Approximate Maximum Allowable Decreasing Differential Pressure Pressure at Mid-Range Catalog No. psig psig psig [3] Diaphragm Actuated—Nitrile (Buna-N) Diaphragm, Zinc Plated Steel Housing 0.2–10 0.4 ±0.1 100 9012GRO1 1–40 1.
Machine Tool, Type G Pressure Switches schneider-electric.us Control Circuit Rated Type G Pressure Switches Class 9012 single stage pressure switches are control circuit rated devices used in pneumatic or hydraulic systems on a wide variety of machine and process applications to protect the equipment and control or monitor the system pressure. Type G machine tool switches are available with NEMA Type 4, 4X, and 13 (IEC IP66) enclosure ratings.
Pressure Switches Machine Tool, Type G 22 Class 9012 / Refer to Catalog 9012CT9701 schneider-electric.us Differential/Dual Stage, Type G PRESSURE, VACUUM, AND FLOAT SWITCHES Differential-Pressure Operation Pressure switches for differential-pressure operation monitor the change in the difference between two pressures.
Refer to Catalog 9012CT9701 schneider-electric.us Electrical Ratings Table 22.55: Control Duty Circuit Ratings Contacts SPDT DPDT AC—50 or 60 Hz Inductive, 35% Power Factor Make Break V A VA A 120 60 7200 6 240 30 7200 3 480 15 7200 1.5 600 12 7200 1.2 120 60 7200 6 240 30 7200 3 480 15 7200 1.5 600 12 7200 1.2 DC Resistive 75% Power Factor Make and Break Amperes 6 3 1.5 1.2 6 3 1.5 1.2 VA 720 720 720 720 720 720 720 720 1 N.O.–1 N.C.
Pressure Switches Class 9012G Dimensions Class 9998 / Refer to Catalog 9012CT9701 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Dimensions 9012G Dimensions, in. (mm) GGW1, 21 5.05 128 2.31 59 Ø 4.38 111 GGW4, 24 X 1.31 33 M (4) Ø 0.28 7 0.50 13 Y 1.25 32 3.63 92 C 1.25 32 2.86 Turn Radius 73 1.89 A 48 M (2) Ø Y 1.61 41 B 2.72 69 X 2.63 67 A Section A–A 1.67 42 1/4 Bolt or Screw C 3.50 89 Section A–A 1.67 42 Ø 1.22 32 0.47 Max. 12 Head M (2) Ø 1.61 41 B 2.
Class 9012 / Refer to Catalog 9012CT9701 Factory Modifications and Accessories Table 22.61: Factory Modifications for Class 9012 Pressure Switches Modification Lock on rising pressure, manual reset only Applies to Pressure Switch Type Available on GDW, GDWM, GEW, GEWM, GFW, GFWM only 120 Vac or Vdc neon pilot light Available on all GAW–GMW, GAWM–GFWM 24 Vdc only LED 24 Vdc LED pilot light with green lens SPDT snap switch rated 1.
Vacuum Switches Types GAW and GVG 22 Class 9016 / Refer to Catalog 9012CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Type GAW—Sensitive Control Applications 9016GAW vacuum switches are provided with double throw contacts; normally open and normally closed circuits allow these controls to be used for standard or reverse action applications. Standard devices can be mounted from the front with the bracket provided.
Commercial Pressure Switches Class 9013 / Refer to Catalog 9013CT9701 schneider-electric.us FHG Pressure Switch Selection and Features Class 9013 Type FHG pressure switches are designed for the control of small electrically driven air compressors. • Contacts open on pressure rise. • Diaphragm actuated. application data, see page 22-19. • For For repair parts kits, see page 22-34. 3.76 96 0.75 19 ™ 0.50 13 2.80 2.
Type F—Pumptrol™ Water Pump Pressure Switches Commercial Pressure Switches 22 Class 9013 / Refer to Catalog 9013CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Type F Pressure Switch Selection and Features • • • • Pressure Switch Designed for the control of electrically driven water pumps. Diaphragm actuated. Type FSG is the standard water pump switch, suitable for all types of pumps: jets, submersible, reciprocating, etc.
Type F—Pumptrol™ Water Pump Pressure Switches Class 9013 / Refer to Catalog 9013CT9701 Table 22.80: Special Features and Modifications for Type FSG, FYG & FRG Devices [10] File LR25490 NOTE: Products on this page are UL Listed, however type numbers ending in 8, 10 or 20 (non rigid pressure lines) must have Form T or TI —otherwise these are UL component recognized.
Commercial Pressure Switches Type G—Pumptrol Pressure Switch 22 Class 9013 / Refer to Catalog 9013CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Type G Pressure Switch Selection and Features Class 9013 Type G Pumptrol pressure switches are designed to control electrically driven water pumps and air compressors. These devices cover higher electrical ratings for directly controlling motors in pump and compressor applications. • Contacts open on pressure rise. • Diaphragm actuated.
Type G—Pumptrol Pressure Switch Commercial Pressure Switches 3.44 87 Table 22.85: Special Features and Modifications for Type G Devices [14] 2.47 63 2.09 53 3.68 99 3.85 98 0.73 18 5.72 145 0.94 24 2.05 52 0.29 (2) 7 Wide Mtg Holes 1.22 31 (3) K.O. Dia. 0.87 1 22 18 NPSF 4 Pipe Thread Note: The mounting bracket shown is available as kit 9049A52. 0.42 11 3.75 99 1.09 28 1.94 49 9013GHG, GSG - with or without Form X 0.06 2 1.
Float Switches Open Tank, Types D and G 22 Class 9036 / Refer to Catalog 9034CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Open Tank or Sump Applications Ambient temperature ratings: Min. -30 °C (-22 °F); Max. +105 °C (+220 °F). For accessories, refer to page 22-34. Table 22.87: Class 9036, 2-Pole, Single Lever Operated NEMA 7, 9 NEMA 1 NEMA 4 Catalog No. Catalog No. Catalog No.
Float Switches Refer to Catalog 9034CT9701 schneider-electric.us Table 22.90: Maximum Forces at Which Switches Are Tested (oz) DG2 DG2 Form R DW31 DW31 Form R DR31 9 8 8 8 8 Force Down To Trip 8 8 8 8 8 DR31 Form R 8 8 Force Up To Trip Weight Supported with Compensating Spring 60 60 66 66 66 66 Type (with or without Form H) Lever Length Position GG2 GG2 GG2 Form R GG2 Form R GR1, GW1 GR1, GW1 GR1, GW1 Short Long Short Long Short Medium Long Type DG Dimensions 0.30 8 1.31 33 2.
Float Switches 22 Open Tank, 9036FG, and Closed Tank, 9037E Refer to Catalog 9034CT9701 schneider-electric.us Closed Tank, Class 9037 Type E PRESSURE, VACUUM, AND FLOAT SWITCHES Type E switches are flange mounted and float movement is transmitted through a QuadRing® seal. Build up the switch to meet your exact requirements from the basic switch, float rod, and float groups below. Switch may be assembled in the field to give contacts that open on liquid rise or close on liquid rise.
Closed Tank, Type H Float Switches Type H Switches Type H switches are attached to the tank by means of a 2-1/2 in. screw-in bushing. An external pointer indicates the float position within the tank when the unit is mounted. Switches come complete with stainless steel float and rod. A Buna N Quad-Ring® seal is used between the float rod and sealing connector.
Float Switches Mechanical Alternators, Types A and C 22 Class 9038 / Refer to Catalog 9034CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Type A, Open Tank Alternators are designed to provide motor alternation in the operation of two motors. Table 22.99: Class 9038 Type A 1.06 26.92 4.69 119.13 (4) K.O.’s for .5 to .75 cond. 12.7 to 19.05 1.125 28.58 4.50 114.3 pos 2 pos 3 (4) .093 dia. 2.36 mtg holes 5.38 136.5 0.75 19.05 1.25 31.7 3.5 to 4.19 88.9 to 106.4 3.0 76.2 1.
Class 9038 / Refer to Catalog 9034CT9701 Type D, Closed Tank, Top Mounted Designed for applications where mounting is to be made at the top of a closed tank. Table 22.103: Class 9038 Type D Contacts Close On Liquid Rise Hinge Post Dimension “V” (in.) Water Level Change Min. Max. Min. Max. 2-5/8 4-11/16 Float Kits, For Use with Type D Switches Type DG Shown with Rod Kit 9049ER5 and Float Kit 9049HF3 Installed. File No.
Accessories and Renewal Parts Kits for Class 9012–9038 Devices Class 9998 / Refer to Catalog 9012CT9701 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Accessories for Float Switches Table 22.106: Class 9049 Accessories for Float Switches Description Compensating Spring #304 stainless steel #316 stainless steel #304 stainless steel #316 stainless steel Brass rod Aluminum rod Brass rod Aluminum rod Dia. 3.62 in. (92 mm), length 4.5 in. (114 mm) Float Dia. 2.5 in. (64 mm), length 7 in.
