Pressure, Vacuum, and Float Switches Pressure, Vacuum, and Float Switches Selection Guide 9012 Sensor Selections 9013,9036, 9037, 9038 Sensor Selections Pressure Sensors XMLG Electronic Pressure Sensors XMLK XMLG Pressure Transmitters and Switches XMLK Pressure Transmitters XMLK Pressure Transmitters and Switches XMLR Electronic Pressure Switches XMLR Pressure Switches Pressure Switches XMLA, XMLB, XMLC, XMLD International Pressure Switches XMLA, XMLB, XMLC, XMLD Dimensions Industrial, Type G Machine
Pressure, Vacuum, and Float Switches Selection Guide 22 Class 9012 / Refer to Catalog 9012CT9701 or9014CT0201 schneider-electric.
Selection Guide Pressure, Vacuum, and Float Switches Class 9013, 9036, 9037, 9038 / Refer to Catalog 9013CT9701 or 9034CT9701 PRESSURE, VACUUM, AND FLOAT SWITCHES schneider-electric.
Pressure Sensors XMLG Pressure Transmitters and Switches Refer to Catalog 9014CT0201 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XMLG Pressure Transmitters and Switches XMLG pressure transmitters and pressure switches are characterized by their ceramic pressure-measuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic.
XMLG Pressure Transmitters and Switches Pressure Sensors Class 9049 / Refer to Catalog 9014CT0201 PRESSURE, VACUUM, AND FLOAT SWITCHES schneider-electric.us XMLG Pressure Transmitters and Switches For connectors and cables, see page 22-9. Table 22.5: Dimensions, in. (mm) Dimension A XMLG•••D2••1 XMLG•••D2••3 XMLG•••D2••7 XMLGpp pDpp , M12 x 1 Co n n e c tio n G 1/4 A (BSAP Male) 1/4" NPT Male 7/16-20 UNF Male A Ø 22.8 (0.90) Ø 18.8 ± 0,1 (0.74) SW 21 (0.83) 8 (0.31) 22 12 (0.47) 56 (2.20) 2.
XMLK Pressure Transmitters Pressure Sensors Refer to Catalog 9014CT0201 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XMLK Pressure Transmitters Type XMLK pressure transmitters are characterized by their ceramic pressuremeasuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics to provide an analog output signal. Table 22.
XMLK Pressure Transmitters and Switches Pressure Sensors schneider-electric.us XMLK Dimensions For connectors and cables, see XMLF Accessories, Wiring Configurations, and Electrical Connections, page 22-9. Table 22.11: Dimensions XMLK, DIN connector NPT G 1/4 A (male) Ø 36 1.417 1/4-18 NP T 86 3.386 Ø 36 1.417 Dimensions = mm / in. 2.5 .098 G 1/4 8.7 .343 Ø 18.8 (± 0,1) .740 12.7 0.5 56.8 2.236 10.7 .421 12 .472 XMLK, M12 connector NPT 22 SW19 G 1/4 A (male) 1/4-18 NP T 93 3.
Electronic Pressure Switches XMLR Pressure Switches Refer to Catalog 9014CT0201 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XMLR and ZMLP Pressure Switches XMLR and ZMLP are user-friendly electronic pressure switches with an easy-to-read four digit display and finger-operated adjustment buttons for scrolling up and down through the menu functions. Burst pressure is six times the nominal pressure (up to 1,800 bar or 26,100 psi).
XMLR Pressure Switches Electronic Pressure Switches Refer to Catalog 9014CT0201 PRESSURE, VACUUM, AND FLOAT SWITCHES schneider-electric.us XMLR Accessories, Wiring, and Electrical Connections Table 22.17: Accessories XMLZL009 XZCC12FDM●0B For use with XMLR●●●●●●●5 XMLZL009 0.370 (13.051) Fixing bracket aluminium XMLR●●● XMLZL017 0.029 (1.023) 22 XMLZL017 Weight kg (oz) Catalog Number Description Cooler with G 1/4 A (male) connections Usage temperature: 150° C (302° F) max.
Pressure Switches 22 XMLA, XMLB, XMLC, XMLD International Pressure Switches Refer to Catalog 9012CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XML International Pressure Switches XMLB XML international pressure switches meet IEC, Cenelec, UL, and CSA standards. They are CE marked.
Class 9049 / Refer to Catalog 9012CT9701 schneider-electric.us XML Catalog Numbers and Accessories Te rm in a l Dia g ra m s 13 11 14 12 XMLA, XMLB 1 C/O sin gle -pole conta ct, s na p a ction 23 21 24 11 12 22 13 14 XMLC 2 C/O single-pole contacts, simultaneous snap action 13 11 23 21 14 12 24 22 XMLD 2 C/O single-pole contacts, snap action (1 per stage) Table 22.
Pressure Switches XMLA, XMLB, XMLC, XMLD Dimensions 22 Class 9049 / Refer to Catalog 9012CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES XML Dimensions XMLAM01, XMLBM05, XMLCM05, XMLA004, X•ML010…500 XMLC / D: 46 XMLA / B: 75 XMLA / B: 35 (2) 5 17.5 37 37 113 XMLC / D: 85 23 (1) = 20-22 = 56 120 (1) 1 fluid entry, tapped G 1/4 (BSP female) or 1/4” NPT (2) 1 electrical connections entry, tapped M20 x 1.5 or Pg 13.5, or 1/2” NPT Ø: 2 elongated holes Ø 5.2 x 6.
Industrial, Type G Pressure Switches Type G Pressure Switches Table 22.26: Fixed Differential, Open Type or NEMA 1 Enclosure NEMA 1 Open Type Range On Approximate Decreasing Differential Maximum Allowable Pressure Pressure at Mid-Range psig psig psig [3] Diaphragm Actuated—Nitrile (Buna-N) Diaphragm, Zinc Plated Steel Housing 0.2–10 0.4 ±0.1 100 1–40 1.2 ±0.3 100 1.5–75 2.2 ±0.4 240 3–150 4.2 ±1 475 5–250 7.4 ±2 750 13–425 13 ±3 850 20–675 19 ±5 2000 Piston Actuated—#440 Stainless Steel Piston.
Pressure Switches Machine Tool, Type G 22 Class 9012 / Refer to Catalog 9012CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Control Circuit Rated Type G Pressure Switches Class 9012 single stage pressure switches are control circuit rated devices used in pneumatic or hydraulic systems on a wide variety of machine and process applications to protect the equipment and control or monitor the system pressure.
Machine Tool, Type G Pressure Switches Differential/Dual Stage, Type G Differential-Pressure Operation Pressure switches for differential-pressure operation monitor the change in the difference between two pressures. Type G differential-pressure switches are used in applications to signal that a predetermined pressure difference has been reached as a result of a widening or increasing difference between the two pressures.
Pressure Switches and Vacuum Switches 22 Class 9012 and 9016 Electrical Ratings and Dimensions Refer to Catalog 9012CT9701 schneider-electric.us Contacts SPDT DPDT AC—50 or 60 Hz Inductive, 35% Power Factor Make Break V A VA A 120 60 7200 6 240 30 7200 3 480 15 7200 1.5 600 12 7200 1.2 120 60 7200 6 240 30 7200 3 480 15 7200 1.5 600 12 7200 1.2 DC Resistive 75% Power Factor Make and Break Amperes 6 3 1.5 1.2 6 3 1.5 1.2 VA 720 720 720 720 720 720 720 720 Single Pole Double Throw 1 N.O.–1 N.C.
Class 9012G Dimensions Pressure Switches schneider-electric.us Dimensions 9012G Dimensions, in. (mm) 2.31 59 Ø 4.38 111 GGW1, 21 1.44 37 GGW4, 24 X X 7.98 203 7.52 195 0.50 13 Y 1.25 32 3.63 92 C 1.25 32 2.86 Turn Radius 73 A 2.72 69 X Section A–A 1.67 42 M (2) Ø Y 1.61 41 B 1/4 Bolt or Screw A 2.72 69 Mounting Detail 1.61 41 C 3.50 89 2.63 67 Section A–A 1.67 42 Ø 1/4 Bolt or Screw 0.47 Max. 12 Head 2.72 69 M (2) Ø 1.61 41 B 2.63 67 1.22 32 GHW1, 21 2.
Pressure Switches 22 Machine Tool, Modifications, and Accessories Class 9012 / Refer to Catalog 9012CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Factory Modifications and Accessories Table 22.
Types GAW and GVG Vacuum Switches schneider-electric.us Type GAW—Sensitive Control Applications 9016GAW vacuum switches are provided with double throw contacts; normally open and normally closed circuits allow these controls to be used for standard or reverse action applications. Standard devices can be mounted from the front with the bracket provided. Two mounting screws are required for a firm attachment to any smooth, flat surface. Allowance must be made for flange projection.
Commercial Pressure Switches 22 Type FHG—Pumptrol™ Compressor Pressure Switch Class 9013 / Refer to Catalog 9013CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES FHG Pressure Switch Selection and Features 3.76 96 0.75 19 1.59 40 2.78 71 0.30 8 ™ 1.19 30 2.34 59 0.30 8 Table 22.51: Dimensions, Type F (Net Weight, 1-1/8 lb) 0.50 13 2.80 2.
Type F—Pumptrol™ Water Pump Pressure Switches Type F Pressure Switch Selection and Features • • • • Pressure Switch Designed for the control of electrically driven water pumps. Diaphragm actuated. Type FSG is the standard water pump switch, suitable for all types of pumps: jets, submersible, reciprocating, etc. Type FYG is designed to meet higher horsepower and pressure requirements. Type FRG is reverse acting: contacts open on falling pressure. Table 22.
Commercial Pressure Switches Type G—Pumptrol Pressure Switch 22 Class 9013 / Refer to Catalog 9013CT9701 schneider-electric.us Table 22.
Type G—Pumptrol Pressure Switch Commercial Pressure Switches schneider-electric.us 3.44 87 2.47 63 2.09 53 3.85 98 0.73 18 5.72 145 0.94 24 2.05 52 0.29 (2) 7 Wide Mtg Holes 1.22 31 (3) K.O. Dia. 0.87 1 22 18 NPSF 4 Pipe Thread Note: The mounting bracket shown is available as kit 9049A52. 0.42 11 Table 22.66: Special Features and Modifications for Type G Devices [14] 3.68 99 3.75 99 1.09 28 1.94 49 9013GHG, GSG - with or without Form X 0.06 2 1.
Float Switches Open Tank, Types D and G 22 Class 9036 / Refer to Catalog 9034CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Open Tank or Sump Applications Ambient temperature ratings: Min. -30 °C (-22 °F); Max. +105 °C (+220 °F). For accessories, refer to page 22-30. Table 22.
Float Switches Refer to Catalog 9034CT9701 schneider-electric.us Table 22.71: Maximum Forces at Which Switches Are Tested (oz) DG2 DG2 Form R DW31 DW31 Form R DR31 9 8 8 8 8 Force Down To Trip 8 8 8 8 8 DR31 Form R 8 8 Force Up To Trip Weight Supported with Compensating Spring 60 60 66 66 66 66 Type (with or without Form H) Lever Length Position GG2 GG2 GG2 Form R GG2 Form R GR1, GW1 GR1, GW1 GR1, GW1 Short Long Short Long Short Medium Long Type DG Dimensions 0.30 8 1.31 33 2.
Float Switches 22 Open Tank, 9036FG, and Closed Tank, 9037E Refer to Catalog 9034CT9701 schneider-electric.us Closed Tank, Class 9037 Type E PRESSURE, VACUUM, AND FLOAT SWITCHES Type E switches are flange mounted and float movement is transmitted through a QuadRing® seal. Build up the switch to meet your exact requirements from the basic switch, float rod, and float groups below. Switch may be assembled in the field to give contacts that open on liquid rise or close on liquid rise.
Closed Tank, Type H Float Switches Type H Switches Type H switches are attached to the tank by means of a 2-1/2 in. screw-in bushing. An external pointer indicates the float position within the tank when the unit is mounted. Switches come complete with stainless steel float and rod. A Buna N Quad-Ring® seal is used between the float rod and sealing connector.
Float Switches Mechanical Alternators, Types A and C 22 Class 9038 / Refer to Catalog 9034CT9701 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Type A, Open Tank Alternators are designed to provide motor alternation in the operation of two motors. Table 22.80: Class 9038 Type A 1.06 26.92 4.69 119.13 (4) K.O.’s for .5 to .75 cond. 12.7 to 19.05 (4) .093 dia. 2.36 mtg holes 5.38 136.5 0.75 19.05 1.125 28.58 1.25 31.7 3.5 to 4.19 88.9 to 106.4 3.0 76.2 1.75 44.45 4.50 114.
Class 9038 / Refer to Catalog 9034CT9701 PRESSURE, VACUUM, AND FLOAT SWITCHES schneider-electric.us Float Switches Type D, Closed Tank, Top Mounted Designed for applications where mounting is to be made at the top of a closed tank. Table 22.84: Class 9038 Type D Contacts Close On Liquid Rise Hinge Post Dimension “V” (in.) Water Level Change Min. Max. Min. Max.
Accessories and Renewal Parts Kits for Class 9012–9038 Devices Class 9998 / Refer to Catalog 9012CT9701 22 schneider-electric.us PRESSURE, VACUUM, AND FLOAT SWITCHES Accessories for Float Switches To order, specify the Class and Type number of the kit. Table 22.87: Class 9049 Accessories for Float Switches Description Compensating Spring #304 stainless steel #316 stainless steel #304 stainless steel #316 stainless steel Brass rod Aluminum rod Brass rod Aluminum rod Dia. 3.62 in. (92 mm), length 4.
