Brochure

22-21
schneider-electric.us
Type F—Pumptrol™ Water Pump Pressure
Switches
Commercial Pressure Switches
Class 9013 / Refer to Catalog 9013CT9701
Type F Pressure Switch Selection and Features
Pressure Switch
•
Designed for the control of electrically driven water pumps. Diaphragm actuated.
•
Type FSG is the standard water pump switch, suitable for all types of pumps: jets,
submersible, reciprocating, etc.
•
Type FYG is designed to meet higher horsepower and pressure requirements.
•
Type FRG is reverse acting: contacts open on falling pressure.
Table 22.56: Pressure Codes
[7]
Standard Action Devices Reverse Action Devices
Settings
Code
Settings
Code
5–21 psi
J15
10–5 psi
J36
8–20 psi
J16
22–12 psi
J22
20–40 psi
J20
22–16 psi
J19
20–50 psi
J18
35–20 psi
J70
30–50 psi
J21
40–20 psi
J23
40–60 psi
J24
50–30 psi
J35
50–70 psi
J33
150–120 psi J64[8]
60–80 psi
J25
Specify other
pressure
J99[8]
Specify other
pressure J99[8]
Table 22.57: Standard Action: Contacts Open On Rising Pressure
Cut-out
Range
(psig)
Approximate
Adjustable
Differential (psig)
Cut-in
Range
(psig)
Pressure Connection
2 Pole
NEMA 1
NEMA 3R[9]
Type Type
20–65 15–30 5–45
1/4" NPSF internal FSG2 FSW2
1/4" NPT external FSG9 FSW9
1/4" bayonet (barbed)
FSG10 FSW10
90° elbow 1/4" bayonet
FSG20 FSW20
20–50 10–30 10–30 1/4" NPSF internal FSG22 FSW22
20–60 10–30 10–45 1/4" NPT external FSG29 FSW29
9–30 6–20 3–10 1/4" NPSF internal FSG42 FSW42
9–30 6–20 3–10 1/4" NPT external FSG49 FSW49
25–80 20–30 5–60
1/4" NPSF internal FSG52 —
1/4" NPT external FSG59 —
34–65 15–30 19–45
(FSG1 through 20 with Form M4 is only available in this range)
25–80 20–30 5–60
1/4" NPSF internal FYG2 FYW2
1/4" NPT external FYG9 FYW9
1/4" bayonet (barbed)
FYG10 FYW10
90° elbow 1/4" bayonet
FYG20 FYW20
39–80 20–30 19–60
(FYG1 through 20 with Form M4 is only available in this range)
20–50 10–30 10–30 1/4" NPSF internal FYG22 FYW22
20–60 10–30 10–45 1/4" NPT external FYG29 FYW29
9–40 6–30 3–10 1/4" NPSF internal FYG42 FYW42
9–40 6–30 3–10 1/4" NPT external FYG49 FYW49
Table 22.58: Maximum Allowable Pressure
for All 9013 Switches
Type
Pressure
FHG, FSG, FYG, FSW, FYW, FRG
GHB, GHG, GSB, GSG
GMG, GSR, GSW
GHR, GHW
220 psig
300 psig
100 psig
250 psig
Table 22.59: Temperature Limitations
for All 9013 Switches
Operation (Media) Storage
Min. -36 °C (-33 °F)
Max. +125 °C (+257 °F)
Min. -36 °C (-33 °F)
Max. +125 °C (+257 °F)
Table 22.60: Reverse Action: Contacts Open On Falling Pressure
Cut-in
Range
(psig)
Approximate Adjustable
Differential (psig)
Cut-out Range
(psig)
Pressure
Connection
1-Pole 2-Pole
Type Type
23–65 15–30 8–45
1/4" NPSF internal FRG12 FRG2
3/8" NPSF internal FRG13 FRG3
1/4" NPT external FRG19 FRG9
10–45 6–20 4–25
1/4" NPSF internal FRG32 FRG22
3/8" NPSF internal FRG33 FRG23
1/4" NPT external FRG39 FRG29
6–14
5, Fixed
1–9
1/4" NPSF internal FRG52 FRG42
3/8" NPSF internal FRG53 FRG43
1/4" NPT external FRG59 FRG49
40–100 20–30 20–80
1/4" NPSF internal FRG72 FRG62
3/8" NPSF internal FRG73 FRG63
65–150 30–45 35–120
1/4" NPSF internal FRG92 FRG82
3/8" NPSF internal FRG93 FRG83
1/4" NPT external FRG99 FRG89
Ordering Information
•
Specify Class 9013 Type F.
•
Select the pressure code from the Pressure Code table above, and
add the code designation to the end of the Type number. Ensure
that the pressure rating of the code falls within the limits of the
device as shown in Table 22.57 and Table 22.60.
•
To order special features from Table 22.61, add the appropriate
Form letter to the Class and Type. Arrange the Form letters in
alphabetical order when ordering more than one special feature.
Electrical Ratings: see
Dimensions: see
Renewal Parts Kits
File E12158 CCN NKPZ File LR25490
NOTE: Products on this page are UL Listed,
however type numbers ending in 8, 10 or 20
(non rigid pressure lines) must have Form T or TI
—otherwise these are UL component
recognized.
Table 22.61: Special Features and Modifications for Type FSG, FYG & FRG Devices
[10]
Description Applies to Types
Form
Bulk package All Type F [11]
One normally open—one normally closed contact FRG 2-Pole only
H
Maintained manual cut-out lever (Auto-Off)
FSG, FYG
M1
Momentary manual cut-in lever (Auto-Start) FRG2-59 only
M3
Low pressure cut-off (Auto-Start-Off) – Operates at approximately
10 psig below cut-in and will turn off the pump
FSG, FYG
M4
Maintained manual cut-in lever (Auto-On) FRG2-59 only
M5
Pulsation plug (Type 2 & 9 only)
FRG, FSG, FYG
P[12]
Plastic flange (max. temp. 120 °F) (max. pressure 80 psi)
Available only on Types FSG2, FYG2, FRG2, FSG•2, FYG•2, FRG•2
FSG•, FYG•, FRG•
Q8
1/4" NPSF internal only
1/2" conduit bushing, 1/2" long thread—on left All Type F
T
Slip-on connectors (load side terminals only)
FSG, FYG
U
Slip-on connectors (line and load terminals)
FSG, FYG
U2
Black cover
FSG, FYG
Z22
22
PRESSURE, VACUUM, AND FLOAT
SWITCHES
[7] Existence of a code does not imply that the code is available for any or all devices.
[8] Minimum order quantity is 4 pieces.
[9] Must be mounted in vertical position to maintain enclosure rating.
[10] Some product configurations are not available—contact your Schneider Electric representative for details.
[11] For bulk package quantities and Form numbers, see Table 22.62 on page 22-21. If a Form is not specified, devices will be shipped individually packaged.
[12] Nylon pulsation plug can be field installed on types having 1/4" NPSF internal connector.
Part number 1530S6G1 is one bag of 50 plugs.
© 2016 Schneider Electric
All Rights Reserved
9/24/2016