Use and Care Guide
9013 FSG Series of Pressure Switches
9013FSG Pumptrol
®
Pressure Switches provide
proven reliability in an easy, simple, compact
installation. The universally accepted and
recognized design is easy to wire, features drift
proof cut-in and cut-out settings, has visible
vertical contacts which are easy to inspect.
No manufacturer offers a broader line of water
pump switches to meet your pumping needs.
Higher pressure settings now
standard on 9013FSG
When you need a higher pressure setting for
longer runs in deep wells, the 9013FSG now
controls pressures up to 80 PSI. The standard
9013FSG now has higher pressure ranges
with settings up to 80PSI cut-out. To order
the higher pressure settings, see catalog
number 9013FSG52J33 (50–70PSI) and
9013FSG52J25 (60–80PSI).
NEMA 3R rated pressure switches
Schneider Electric provides the 9013FSG,
9013FYG and the 9013FTG with NEMA 1
and NEMA 3R rated enclosures. The 9013FTG
is the commercial pressure switch with
non-adjustable differential and the FYG
offers a higher horsepower. Features of the
NEMA 3R products include:
Rain-tight enclosures suitable for •
outdoor usage
Thicker zinc plating on the metal frame for •
greater resistance to corrosion
A plastic cover certied to protect against •
damage from rain, sleet and ice formation
Narrow differential pressure switches
Schneider Electric provides narrow differential
switches including 6-20 PSIG differential
switches. Choose from the 9013FSG42/49
or higher HP 9013FYG42/49. Also available
is the 9013FRG with reverse action. The
9013FRG pressure switch is non-adjustable
differential with 6-14 PSIG cut-in and 1-11
PSIG cut-out ranges.
Manual on/off switch
The 9013 series offers an optional on/off switch for the pressure switch.
This allows you to manually turn on and off your pump system for
extended periods of time.
Automatic low pressure/water cut-off
If system pressure is lost for any reason, a low water condition for
example, the automatic lower pressure/water cut-off feature will open
the contacts, turning off the pump.
Pulsation plug
Pulsation plugs are available to control pressure, due to increased start
up pressure, generated by the high speed jet pump motors or by valves
prone to a surge in pressure.
Bayonet pressure connector
Expensive shielded electrical cable between the jet pump motor and
controller can be eliminated by mounting the pressure switch directly
on the jet pump motor and utilizing a barbed bayonet (straight or 90°
elbow) uid connection.
The Schneider Electric, Square D
®
brand of pressure switches is the
most trusted brand in residential, commercial and industrial pumping
applications. For over 60 years, Square D pressure switches continue to
meet the needs of our customers.