Brochure

© 2017 Schneider Electric
All Rights Reserved
23-43
schneider-electric.us
Type JCK
Timers
Class 9050 / Refer to Catalog 9050CT9601
Type JCK60 and JCK70 Timers
Type JCK60
9050JCK60V14
9050JCK70V14
8501NR61
8501NR52
8501NH7
This On-Delay timer uses four push button thumbwheels to set the time delay. One
switch is used for the range. The remaining three are used for the time setting.
Table 23.133: Selection
Timing
Modes
Timing Ranges Type
On Delay
0.01s
0.1s
S
0.1m
M
0.1h
H
0.05–9.99 seconds
00.1–99.9 seconds
001–999 seconds
00.1–99.9 minutes
001–999 minutes
00.1–99.9 hours
001–999 hours
JCK60
[6]
Type JCK70
This multifunction multirange time delay relay uses five push button thumbwheel
switches. Three switches are used for the time delay, one switch is used for the timing
range, and the other switch is used to select the timing mode.
Table 23.134: Selection
Timing
Modes
Timing Ranges Type
On Delay
Interval
Off Delay
One Shot
Repeat Cycle-Off
[7]
Repeat Cycle-On
On/Off Delay
1 Shot Falling Edge
Watchdog
Trigger On Delay
Same as JCK60
JCK70
[6]
Table 23.135: Sockets
Contact Terminal
Arrangement
Connection
For Use with
Relays
Sold in Lots of
Catalog Number[8]
Mixed[9]
Screw Connector
JCK11–19
JCK31–39
JCK51–59
JCK60
JCK1 F
JCK3 F
JCK5 F
1
8501NR51
10 8501NR51B
JCK21–29
JCK41–49
JCK70
JCK2F
JCK4F
1
8501NR61
10 8501NR61B
Separate[10]
Screw Connector
JCK11–19
JCK31–39
JCK51–59
JCK60
JCK1 F
JCK3 F
JCK5 F
1
8501NR52
10 8501NR52B
JCK21–29
JCK41–49
JCK70
JCK2F
JCK4F
1
8501NR62
10 8501NR62B
Table 23.136: Accessories (sold in lots of 10)
Description For Use With
Sold in Lots of
Catalog Number
Metal Restraining Strap
8501NR51 sockets
1
8501NH7
8501NR52 sockets
8501NR61 sockets
8501NR62 sockets
Approvals for 9050JCK Timers
File: E3190
CCN: NLDX2
File: E3190
CCN:
NLDX,
NLDX7
[11]
File:
260367
Class:
3211 07
IEC
61810-1
RoHS
Com-
pliant
23
RELAYS AND TIMERS
[6] Voltage code must be specified to order this product. Refer to the standard voltage codes listed in Table 23.131 and insert as shown in Table 23.132.
[7] The repeat cycle mode uses the same on-time and off-time.
[8] Please note that the B suffix only desginates quantities of 10 and is not printed on the socket.
[9] The inputs and outputs are mixed on both sides.
[10] The inputs and outputs are on separate sides.
[11] When used with the appropriate 8501NR socket.
6/20/2017