Instructions / Assembly

1 Solar Panel Allow to charge the internal battery.

2 LEDs Night lighting to obtain black and white photos

and videos.

3 Photo lens Image sensor and infrared lter.

4 Test light Flashes in TEST mode when there is detec-

tion and ashes 30 seconds in PHOTO/VIDEO

mode to allow the user to leave without being

photographed or recorded.

5 Cable lock hole Allows the user to install a CL-6FT cable lock,

sold separately.

6 Fresnel lens Expands the detection area and increases the

sensitivity of the camera’s motion sensor.

7 12V power jack This camera can be powered from an external

12-volt DC input such as a 12V battery or a

12V adapter, each sold separately.

8 Microphone Records sound in video mode.

9 Slot for installation

strap

Allows the user to install the camera using

the installation strap included.

10 BUSY LED Lights up when TEST mode is activated.

11 Tripod mount Standard ¼-20" tripod mount.

12 Battery case Case for AA batteries or a rechargeable

lithium battery pack.

13 OK button Allows the user to make a selection.

14 Navigation buttons Buttons to set the camera.

15 On-Off Switch Allows the user to turn on/off the camera.

16 Viewign screen Allows the user to access the main menu and

view photos/videos.

17 SD card slot An SD card is required to record photos/

videos.

Components