USER MANUAL SOLAR TRAIL CAMERA Models: SOLAR & comparable* support.spypoint.com 1-888-779-7646 tech@spypoint.com v1.8 * Specs and features may differ across comparable models. Refer to website or packaging for full details.
ABOUT US This manual will guide you through all the features of your device so that you will get optimal use out of your SPYPOINT product. Our priority is to provide outstanding customer service. If you need support for your product, please contact the SPYPOINT technical support or visit our website. GG Telecom’s mission is to offer products that are easy to use, innovative, affordable and of exceptional quality. Our SPYPOINT products are mainly used for hunting and residential/commercial surveillance.
Table of contents Components.................................................................................. 4 Specifications SOLAR............................................................................................ 6 Power............................................................................................ 7 Memory card & Busy LED............................................................... 8 Settings.......................................................................................
Components 1 7 2 8 3 4 13 5 14 15 16 17 6 1 Solar pannel LEDs 2 3 Photo lens 4 Test light 5 Cable lock hole 6 Detection lens 9 10 11 12 9 7 12V Jack 13 OK button 8 Microphone 14 Navigation buttons 9 Slot for installation strap 10 BUSY LED 11 Tripod mount 12 Battery case 4 15 ON / OFF Switch 16 Viewing screen 17 SD card slot
Components 1 Solar Panel Allow to charge the internal battery. 13 OK button Allows the user to make a selection. 2 LEDs Night lighting to obtain black and white photos and videos. 14 Navigation buttons Buttons to set the camera. 3 Photo lens Image sensor and infrared filter. 15 On-Off Switch Allows the user to turn on/off the camera.
Specifications SOLAR Photo recording Detection system Photo resolution 12 MP Motion sensor PIR File format JPG Detection angle 40° Time lapse mode Intervals from 1m to 24h Detection range Adjustable from 5 to 80 ft Multi-shot mode Up to 6 photos per detection Trigger speed 0.
Power INTERNAL RECHARGEABLE BATTERY & SOLAR PANEL OPTIONAL POWER SOURCES First, look at the internal battery percentage in the DETECTION TEST menu. If the percentage is low and the battery logo is not green, you will need to charge the camera for 24-48 hours before use. While charging, make sure the camera is turned off and the solar panel is facing down so it does not interfere with the USB charging process.
Memory card / "BUSY" LED INSERTING THE MEMORY CARD Before inserting or removing a memory card, always turn off the camera to prevent loss or damage of the photos already recorded. Also make sure that the switch on the side of the card is not in the LOCK position. When the camera is turned on and no memory card is used, the camera beeps. In TEST mode, the screen displays "Insert Memory Card". Insert an SD/SDHC memory card (up to 32 GB capacity) in the card slot with the label side facing upward.
Settings Use the and buttons to navigate in the interface and modify the selection, the OK button to select and the button to return to the previous menu. 1 Selected photo / total number of photos 2 The play icon indicates that this element is a video START CAMERA Allows the user to start the camera in either, PHOTO, VIDEO or TIME LAPSE mode.
Settings PHOTO SETTINGS Sets the options of the PHOTO mode. TIME LAPSE SETTINGS Sets the options of the TIME LAPSE mode. Recommended settings Interval: The camera can be configured for usage in trails. This situation usually presents low activity level, fast subjects and a small number of photos is expected. These settings increase the chances of capturing animals that follow each other. Allows the camera to take photos at regular preset intervals.
Settings GENERAL SETTINGS Sets the general options of the camera. Device name Quality: Allows naming the camera with the electronic keyboard to identify it clearly. This option is particularly useful for users with more than one camera. Allow the user to set the photo quality. (Normal/High) Info on photos: Language: (Yes/No) Allows the user to select a language for the camera menus. Allows the user to have date, time, temperature and moon phases printed on the photos.
illumination modes comparison* (Night modes) Night mode: Allows the user to set the best option for photos. optimal IR-boost blur reduction Battery life Flash range Blur reduction Temp. units: MODE MODE (°C/°F) MODE * Available for photos only Allows the user to select the temperature display.
Installation & Mounting bracket INSTALLATION MOUNTING BRACKET Recommended installation height: To remove the camera from the mounting bracket: The camera should be installed at the same height as the animal’s mid-body. 1. Push the tab to release the camera from the mounting bracket. Ideal installation for quality pictures & videos: The targeted animal should be 25 feet / 7.5m away from the camera for a better field of view. 2. Remove the camera.
File transfer to a computer To transfer photos/videos to a computer: • Turn OFF the camera. • Remove the SD card from the camera. • Insert the SD card into the computer slot, or use a memory card adaptor. • The computer will detect the card and install the driver automatically. For a PC For a Mac Click on "My Computer" or «This PC» on your Desktop Click the Finder icon in the Dock. Locate your device under "Removable Disk" and then click to access it.
Available accessories Lithium battery pack & charger #LIT-C-8, Rechargeable lithium battery pack and AC charger with charge indicator light. Fits all SPYPOINT cameras. Steel security box #SB-200, Steel box to secure the camera against theft. It also protects it from breakage caused by bears or other animals. Fits all SOLAR 42 LED SPYPOINT cameras. 12V DC Power cable #CB-12FT, 12 ft power cable with alligator clips at one end to connect a 12V battery to a camera.
Troubleshooting Issue Possible solutions Impossible to turn • Verify if there are batteries in the camera. on the camera • Verify if the batteries are correctly installed. • Install the latest update (available on www.spy point.com under SUPPORT section). • Replace alkaline batteries or recharge the lithium battery pack. The screen of the camera turns off • The camera may be set to PHOTO or VIDEO mode and the screen turns off after a period of 30 seconds in order to preserve battery life.
Warranty & Repair LIMITED WARRANTY INSTRUCTIONS FOR REPAIR SERVICE This SPYPOINT product designed by GG Telecom, is covered by a one (1) year warranty on material and workmanship starting from the original date of purchase. The sales receipt is the client’s proof of purchase and must be presented if warranty service is needed. This warranty will be honored in the country of purchase only.
Regulations FCC REGULATIONS FCC Part l5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
