LINK-MICRO-S-LTE QUICKSTART GUIDE v.1.
ENGLISH In the box 1x LINK-MICRO-S-LTE camera 1x Antenna holder 1x Installation strap 1x Quick start guide 1x SIM card that is preactivated and inserted in the camera 1x USB Micro USB cable 1x LIT-10 lithium battery pack NOTE: MicroSD memory card is sold separately. User manual, latest firmware, and FAQ available at: SPYPOINT.
5 2 ENGLISH 1 6 7 3 8 4 9 10 11 12 13 14 15 16 17 3
ENGLISH Getting started CHARGING THE LITHIUM BATTERY • Remove the lithium battery pack from the camera. • Using the Micro USB cable, recharge the battery pack for about 12 hours. • Once the lithium pack is fully charged, the red light will turn green. Do not insert AA batteries into the lithium battery compartment, as this could damage the camera. HOW YOUR CAMERA USES SEVERAL POWER SOURCES 1.
ENGLISH Getting started USING AN EXTERNAL 12V BATTERY • Using an external 12V battery source does not recharge the lithium battery pack. • The solar panel will not recharge an external 12V battery. FORMATTING YOUR MicroSD CARD Before inserting the MicroSD card into your camera, it must be reformatted via a computer to ensure proper functionality. Memory card is sold separately.
ENGLISH ACTIVATING YOUR CAMERA You must activate your camera through the free SPYPOINT app or the SPYPOINT.COM website. FINDING THE ACTIVATION CODE The activation code is located inside the battery compartment. You will need this unique code to activate the LINK-MICRO-S-LTE. SPYPOINT APP Follow these steps: 1. On Google PlayTM or the App StoreTM, search for "SPYPOINT app". 2. Download and install the app on your smartphone or tablet. 3. Start the app. Select "ACTIVATE A DEVICE".
SPYPOINT.COM website Follow these steps: ENGLISH ACTIVATING YOUR CAMERA 1. On the SPYPOINT.COM website, select "LOGIN" in the top navigation menu. On the displayed page, select "Register," fill out the required fields, then log in. 2. Select the + sign on the far right of the page; in the list, select "LINK-MICRO-S-LTE" then follow the steps. 3. When complete, a confirmation email with instructions on how to finalize the creation of your account will be sent to you. 4.
ENGLISH CONFIGURING YOUR CAMERA Both the SPYPOINT app and website let you configure all the camera settings remotely. They also provide basic information on your camera – such as: cellular signal strength, battery level, and MicroSD card space used. This information is based upon the latest connection with your camera. New settings take effect every time the camera connects with app or website.
ENGLISH STARTING YOUR CAMERA FIRST TIME SETUP 1. Turn on the camera. 2. The green "STATUS" light will flash while searching for a signal (can -- take a few minutes). 3. The "STATUS" light will light up in one of the following 3 colors: Red: Insufficient signal. Orange: Acceptable signal. Green: Optimal signal. When the top right light flashes red, 30 seconds remain before the photo mode is turned on. This allows you to leave the area without being photographed.
ENGLISH DISPOSAL ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES. If one day your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center. Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
ENGLISH FCC THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions: 1. This device must not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. For a complete list of specifications, features, and settings, visit our LINK-MICRO-S-LTE page at www.spypoint.com. THANK YOU FOR CHOOSING FAQ, user manual & latest firmware available at: SPYPOINT.
