FORCE USER GUIDE ULTRA COMPACT TRAIL CAMERA Models: FORCE-10 FORCE-11D & comparable* support.spypoint.com 1-888-779-7646 service@spypoint.com v1.8 * Specs and features may differ across comparable models. Refer to website or packaging for full details.
FORCE ABOUT US This manual will guide you through all the features of your device so that you will get optimal use out of your SPYPOINT product. Our priority is to provide outstanding customer service. If you need support for your product, please contact the SPYPOINT technical support or visit our website. GG Telecom’s mission is to offer products that are easy to use, innovative, affordable and of exceptional quality.
FORCE Table of contents Components.................................................................................. 4 Specifications FORCE-10....................................................................................... 6 FORCE-11D..................................................................................... 7 Power............................................................................................ 8 Memory card & Busy LED............................................................
FORCE Components 7 8 13 1 2 3 4 14 5 15 16 6 17 9 1 LEDs 2 Photo lens 10 11 12 9 7 12V jack 13 OK button 8 Microphone 14 Navigation buttons (FORCE-11D & comparable) 15 4 Cable lock hole 9 Slot for installation strap ON / OFF switch 5 Light sensor 16 Configuration screen 10 6 Motion sensor BUSY LED (FORCE-10 & comparable) 11 Tripod mount Viewing screen 12 Battery case (FORCE-11D & comparable) 3 Test light 4 17 SD card slot
FORCE Components 1 LEDs Night lighting to obtain black and white photos and videos. 2 Photo lens Image sensor and infrared filter. 3 Test light Slot for installation strap Allows the user to install the camera using the installation strap included. 10 BUSY LED Lights up when TEST mode is activated. Flashes in TEST mode when there is detection and flashes 30 seconds in PHOTO/VIDEO mode to allow the user to leave without being photographed or recorded.
FORCE Specifications FORCE-10 Photo recording Detection system Photo resolution 10 MP Motion sensor PIR File format JPG Detection angle 40° Time lapse mode Intervals from 1m to 24h Detection range Adjustable from 5 to 80 ft Multi-shot mode Up to 6 photos per detection Trigger speed 0.
FORCE Specifications FORCE-11D Photo recording Detection system Photo resolution 11 MP Motion sensor PIR File format JPG Detection angle 40° Time lapse mode Intervals from 1m to 24h Detection range Adjustable from 5 to 80 ft Multi-shot mode Up to 6 photos per detection Trigger speed 0.
FORCE Power The battery level is shown in the bottom right corner of the screen when the camera is in TEST mode. When a single line remains,the camera will continue to take photos. However, we strongly recommend to change the AA batteries or charge the lithium battery pack before they are empty. If a video is being recorded and the battery level reaches 0%, the camera saves the file before shutting down. AA BATTERIES EXTERNAL (12V) This camera requires 6 AA batteries (1.5V).
FORCE Memory card / "BUSY" LED INSERTING THE MEMORY CARD Before inserting or removing a memory card, always turn off the camera to prevent loss or damage of the photos already recorded. Also make sure that the switch on the side of the card is not in the LOCK position. When the camera is turned on and no memory card is used, the camera beeps. In TEST mode, the screen displays "Insert Memory Card". Insert an SD/SDHC memory card (up to 32 GB capacity) in the card slot with the label side facing upward.
FORCE Settings Use the and buttons to navigate in the interface and modify the selection, the OK button to select and the button to return to the previous menu. 1 Selected photo / total number of photos 2 The play icon indicates that this element is a video START CAMERA Allows the user to start the camera in either, PHOTO, VIDEO or TIME LAPSE mode.
FORCE Settings PHOTO SETTINGS Sets the options of the PHOTO mode. TIME LAPSE SETTINGS Sets the options of the TIME LAPSE mode. Recommended settings Interval: The camera can be configured for usage in trails. This situation usually presents low activity level, fast subjects and a small number of photos is expected. These settings increase the chances of capturing animals that follow each other. Allows the camera to take photos at regular preset intervals.
FORCE Settings GENERAL SETTINGS Sets the general options of the camera. Device name Quality: Allows naming the camera with the electronic keyboard to identify it clearly. This option is particularly useful for users with more than one camera. Allow the user to set the photo quality. (Normal/High) Info on photos:(Yes/No) Language: Allows the user to have date, time, temperature and moon phases printed on the photos.
FORCE illumination modes comparison* (Night modes) Night mode: Allows the user to set the best option for photos. optimal IR-boost blur reduction Battery life Flash range Blur reduction MODE MODE MODE * Available for photos only (FORCE-10 & comparable don't have the Blur reduction option) Temp. units: (°C/°F) Allows the user to select the temperature display.
FORCE Installation & Mounting bracket INSTALLATION MOUNTING BRACKET Recommended installation height: To remove the camera from the mounting bracket: The camera should be installed at the same height as the animal’s mid-body. 1. Push the tab to release the camera from the mounting bracket. Ideal installation for quality pictures & videos: The targeted animal should be 25 feet / 7.5m away from the camera for a better field of view. 2. Remove the camera.
FORCE File transfer to a computer To transfer photos/videos to a computer: • Turn OFF the camera. • Remove the SD card from the camera. • Insert the SD card into the computer slot, or use a memory card adaptor. • The computer will detect the card and install the driver automatically. For a PC For a Mac Click on "My Computer" or «This PC» on your Desktop Click the Finder icon in the Dock. Locate your device under "Removable Disk" and then click to access it.
FORCE Available accessories Lithium battery pack & charger #LIT-C-8, Rechargeable lithium battery pack and AC charger with charge indicator light. Fits all SPYPOINT cameras. 12V DC Power cable #CB-12FT, 12 ft power cable with alligator clips at one end to connect a 12V battery to a camera. Steel security box #SB-FORCE, #SB-200 Steel box to secure the camera against theft. It also protects it from breakage caused by bears or other animals. Fits all 42 LED SPYPOINT cameras.
FORCE Troubleshooting Issue Possible solutions Impossible to turn • Verify if there are batteries in the camera. on the camera • Verify if the batteries are correctly installed. • Install the latest update (available on www.spypoint.com under SUPPORT section). • Replace alkaline batteries or recharge the lithium battery pack. The screen of the camera turns off • The camera may be set to PHOTO or VIDEO mode and the screen turns off after a period of 30 seconds in order to preserve battery life.
FORCE Limited warranty LIMITED WARRANTY INSTRUCTIONS FOR REPAIR SERVICE This SPYPOINT product designed by GG Telecom, is covered by a one (1) year warranty on material and workmanship starting from the original date of purchase. The sales receipt is the client’s proof of purchase and must be presented if warranty service is needed. This warranty will be honored in the country of purchase only.
FORCE Regulations FCC REGULATIONS FCC Part l5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
