User Guide

6 7
ENGLISH
ENGLISH
Use the  and  buttons to navigate in the interface and to change
options. Use the OK button to conrm and the BACK button to
return to the previous menu.
GENERAL SETTINGS
A. To turn ON/OFF the camera, press and hold the OK button.
B. In the home menu, select SETTINGS and then GENERAL to
access to the General settings menu.
C. Set the Date (MM/DD/YY or DD/MM/YY).
D. Set the Time (Hour/Minute).
E. Set the Night mode (Best option for photos)
Settings
illumination modes comparison* (Night modes)
* Available for photos only
optimal
MODE
IR-boost
MODE
Blur reduction
Battery life
Flash range

 




CONFIGURE THE SETTINGS OF THE 3 OPERATING MODES
In the home menu, select SETTINGS and then, PHOTO, TIME
LAPSE or VIDEO to access to the respective operating mode
menu.
PHOTO
Delay: Allows the user to choose the time interval between each
detection before the camera can record the next photo.
Multi-shot: Takes up to 6 consecutive shots at each detection,
with a 5 second delay between each photo.
TIME LAPSE
Interval: This option allows the camera to take photos at regular
preset intervals without detection.
VIDEO
Delay: Allows the user to choose the time interval between each
detection before the camera can record the next video.
Video length: Allows the user to select the duration of the
recording.
Photo rst: When this option is enabled, a photo is taken
immediately before each video.
(Conguration)
Photo
(Conguration)
Time lapse
(Conguration)
Vidéo
HOME
SETTINGS
Start Camera
Detection test
Settings
Photo
Time lapse
Video
General
(Conguration)
Photo
(Conguration)
Time lapse
(Conguration)
Vidéo
(Conguration)
Général
HOME
SETTINGS
Start Camera
Detection test
Settings
Photo
Time lapse
Video
General