User Guide

4 5
ENGLISH
ENGLISH
REMOVE THE CAMERA FROM THE MOUNTING BRACKET
• Push the tab to release the camera from the mounting bracket.
• Remove the camera.
CHOOSE A POWER SOURCE
Observe the proper battery polarity orientation according
to the (+) and (-) marks when installing AA batteries.
To ensure maximum performance of the camera and prevent battery
leak, we recommend the use of new batteries. Do not mix old and new
batteries together or mix battery type . Use ALL alkaline or ALL lithium.
Rechargeable AA batteries are not recommended as the lower vol-
tage they produce can cause operational issues.
Getting started
RECHARGEABLE 7.4 VOLT LI-ION POLYMER BATTERY 2.0 Ah
RECYCLE OR DISPOSE OF PROPERLY
Li-ion
Made in China
|
Fabriqué en Chine v2.3
www.spypoint.com
P INTSPY INTPSPY
Models: LIT-09: Battery only LIT-C-8: LIT-09 Battery & charger WARNING: To reduce risk of fire or burns, - Do not attempt to open, disassemble, or service the battery pack. - Do not crush, puncture, short external contacts, or dispose of in fire or water.
ATTENTION: Pour réduire les risques de feu ou de brûlures, - Ne pas essayer d’ouvrir, désassembler, ou de réparer la pile. - Ne pas frapper, percer, court-circuiter les contacts externes de la pile ou mettre dans le feu ni l’eau.
6 alkaline or lithium
AA batteries
Lithium battery pack
LIT-09/LIT-C-8
DC 12V
12V power
source
INSERT THE MEMORY CARD
Insert an SD/SDHC memory card (up to 32 GB capacity) in the card
slot with the label side facing upward. The card is inserted correctly
when a click is heard. Always ensure that the camera power is OFF
before inserting an SD card.
We suggest to format your SD card if it's been in another
electronic device.
