FORCE-10 & COMPARABLES* QUICK START GUIDE v1.
In the box 1x Camera ENGLISH ENGLISH 5 1x Mounting brackets 1x Installation strap 1 1x Quick start guide 2 Note: Memory card and batteries are sold separately. 3 9 4 6 8 7 User manual, latest firmware & FAQ available at: www.support.spypoint.
ENGLISH REMOVE THE CAMERA FROM THE MOUNTING BRACKET INSERT THE MEMORY CARD • Push the tab to release the camera from the mounting bracket. • Remove the camera. Insert an SD/SDHC memory card (up to 32 GB capacity) in the card slot with the label side facing upward. The card is inserted correctly when a click is heard. Always ensure that the camera power is OFF before inserting an SD card. ENGLISH Getting started Models: LIT-09: Battery only LIT-C-8: LIT-09 Battery & charger SPYP INT v2.3 www.
Settings GENERAL SETTINGS CONFIGURE THE SETTINGS OF THE 3 OPERATING MODES In the home menu, select SETTINGS and then, PHOTO, TIME LAPSE or VIDEO to access to the respective operating mode menu. HOME Start Camera A. To turn ON/OFF the camera, press and hold the OK button.
RECOMMENDED SETTINGS IN PHOTO MODE CAMERA CAMERA CAMERA CAMERA ENGLISH or Usage in trails Usage by a feeder Delay Instant 5 min Multi-shot 1 1-3 ENGLISH Installation & Mounting bracket When installed with the mounting bracket, the camera can be removed to access the battery case without affecting the installation. Recommended installation height: The camera should be installed at the same height as the animal’s mid-body.
In DETECTION TEST mode, no photo or video is recorded. Pass in front of the camera from left to right. When the camera detects motion, the test light blinks. If the system does not detect the movement, realign the system differently. HOME Start Camera ENGLISH Detection test Settings THANK YOU for choosing ENGLISH TEST THE DETECTION OF THE CAMERA START THE CAMERA Select the desired operating mode (photo, time lapse or video) in the mode menu by pressing OK.
