Product Manual

1008290 Rev. C 8
READ BEFORE USING
OPERATE SAFELY
Keep bystanders away when you operate this machine.
Use this machine for intended purpose only.
Do not let children or an untrained person operate
machine.
Keep all parts in good condition and properly installed.
Fix damaged parts immediately. Replace worn or broken
parts.
Do not modify the machine or safety devices.
Unauthorized modifi cations to the machine may impair
its function and safety, and void the warranty.
Do not let anyone sit or ride on equipment during
operation. Keep riders off attachment.
Wear substantial footwear and long trousers. Do not
operate the equipment when barefoot or wearing open
sandals.
Do not wear loose fi tting clothing that can get caught in
moving parts.
Always wear eye protection when operating the
equipment.
Stay alert for holes in the terrain and other hidden
hazards.
Watch out for traffi c when crossing or near roadways.
Before you operate any feature of this machine, observe
your surroundings and look for bystanders.
Always wash hands after contact with fertilizers and
pesticides.
Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
Spreader does not sit fl at The "feet" or the fl attened
portion of the spreader hopper
support tubes are not bent
equally.
Using a hammer or pliers,
bend the feet to be equal with
each other.
Defl ector shut off is binding
and will not open/close
properly
Shut off plate is jammed with
debris.
Thoroughly wash out hopper
and shut off plates with water.
Ensure debris is not stuck
between shut off plate and
rate gate plate.
TROUBLESHOOTING