Product Manual

English Manual Page 9 1019548-A
Assembly
6. Adding Spreader Mount
The assembly process for the next few steps will vary depending on the brand of spreader you're using:
Fig. 4
Align the spreader mount (3) with the adjustment
plate (2) as illustrated below. (Fig. 4)
Add a 3/8" washer (13) to two 3/8 hex bolts (11).
Run these bolts through the adjustment plate (2)
and the spreader mount (3). Secure with another
3/8" washer (13) and 3/8" nylon lock nut (7).
Tighten the bolts down.
Fig. 5
Align the spreader mount (3) with the adjustment
plate (2) as illustrated below. (Fig. 5)
Add a 3/8" washer (13) to two 3/8 hex bolts (11).
Run these bolts through the adjustment plate (2)
and the spreader mount (3). Secure with another
3/8" washer (13) and 3/8" nylon lock nut (7).
Tighten the bolts down.
SPYKER LESCO
13
13
13
13
11
7
13
13
13
13
11
7
3
3