Product Manual
English Manual Page 12 1019548-A
Align the spreader to the hitch mount (3).
Add a 1/2" at washer (12) to each of
four 1/2" x 3" hex head bolts (10).
Slide these bolts through the spreader and hitch
mount as illustrated.
After each bolt passes through, secure from
below using the remaining four 1/2" at washers
(12) and 1/2" hex nuts (8).
Assembly
9. Mounting the Spreader
Align the spreader to the adaptor plate (16).
Add a 1/4" at washer (19) to two 1/4" x 1" hex
head bolts (17). Slide these bolts through the
hitch mount and spreader as illustrated.
After bolts pass through, secure each with
an additional 1/4" at washer (19) and 1/4" hex
nut (21)
Next, add a a 5/16" washer (20) to a 5/16" x 1"
hex bolt (18). At the base of the adaptor
plate (16) run the bolt through the small gap and
secure on the outside with another 5/16" washer
(20) and a 5/16" lock nut (22).
Repeat this process on the opposite side.
SPYKER
LESCO
Fig. 7 Fig. 8
10
12
12
12
12
10
10
12
12
12
12
8
8
3
8
8
10
16
19
19
19
19
21
17
Fig. 8
20
20
18
22