Product Manual

English Manual Page 10 1019548-A
Assembly
These brackets are not
necessary for a Spyker
Hitch Assembly.
Skip to Step 8 on
page 11.
Align the Adaptor Brackets (15) and (16) to the Spreader Mount (3) as
illustrated here:
Add a 1/2" Flat Washer (12) to each of four 1/2" x 3 hex head bolts (10).
Slide these bolts through the adapter plates (15) and (16).
After each bolt passes through the plates and mount (3), secure in place using
the remaining four 1/2" at washers (12) and 1/2" hex nuts (8).
SPYKER LESCO
15
12
12
12
12
10
10
10
10
8
8
8
8
12
12
12
12
3
16
Fig. 6
7. Adding Spreader Adapter Brackets
The assembly process for the next few steps will vary depending on the brand of spreader you're using: