.68 Caliber Semi-Automatic Paintball Marker USER MANUAL English Français
English .
English IMPORTANT SAFETY GUIDELINES WARNING • • • • • • • • • • • • • • • • • • • • • • • • This paintball Marker is NOT a toy. Misuse can cause serious injury or death. Kingman recommends that the customer be at least 18 years of age to purchase this product. Person under 18 years of age must have adult supervision when using this product. Read this User manual before using this product.
English 8 STEPS TO START AND PLAY IMPORTANT: Please read the Safety and Operation Guidelines before you start the 8 quick steps to Start and Play. 1. Make sure the safety is ON 3. Install a CO2/Compressed air tank 2. Insert the barrel blocking device 4. Install a paintball loader and add paintballs in the loader 5. Put on your paintball goggles and cock back the marker 7. Unlock the safety 6. Remove the barrel blocking device 8.
English CO2 / COMPRESSED AIR TANK WARNINGS REMOVING A CO2 / COMPRESSED AIR TANK Firmly unscrew the CO2 / Compressed Air Tank by turning the tank counter-clockwise until it comes out of the C/A Adapter. HELPFUL TIP: After firing the marker, you should ALWAYS remove the CO2 / Compressed Air Tank before storing. When the tank is being removed, excess air will release from the C/A Adapter. CAUTION: Never expose any skin to the C/A Adapters bleed hole when removing the tank.
English INSTALLING / REMOVING A SHOULDER STOCK Place the Shoulder Stock in the top breach of the Receiver behind the Venturi Bolt. Once the Shoulder Stock is in place secure the Stock with the set screw provided, then tighten with the Allen wrench. DANGER: Do not look down the Marker barrel. Always wear goggles specifically designed for paintball use while working on your paintball Marker. Loosen the set screw on the right side of the Receiver with the Allen wrench.
English the inside of the Receiver with a squeegee and wipe the Venturi Bolt clean with a rag or paper towel. Apply some paintball gun oil on Striker O-ring periodically. IMPORTANT: It is not necessary to disassemble the rear internals for basic maintenance unless the Striker O-ring needs to be replaced. Reassembly Rear Internals STEP 1 Insert the Venturi Bolt and the Striker Bolt together.
English MR4™ PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 * 27 28 29 30 31 32 33 ASA057 BAR001 BAR046 BLS035 FND046 FRG002 FRG043 FRG044 FRG046 GRP008 HSE013 HSF004 HSF006 HSF011 ITP015 ITP023 ITP024 ITP025 LPC046 ORG001 ORG002 ORG003 ORG004 ORG025 ORG026 PAK012 REC046 RPN004 RPN005 RPN006 RPN016 RPN017 SAB001 C/A Adapter (matte black) Spyder Barrel Plug 1PCS Barrel 12” (matte black) Ball Stopper Clamping Feed Neck w/Nut & Screw Tactical Shoulder Stock Shroud Ring Sight Fro
Français WARRANTY STATEMENT Kingman warrants the original retail purchaser that this Marker is free from defects in material and workmanship under normal use and service for a period of (1) year from the original date of purchase. Kingman agrees to repair or replace (at its discretion) any product within a reasonable period of time.
Français IMPORTANTES CONSIGNES DE SECURIT WARNING • • • • Ce lanceur de paintball n’est pas un jouet, il peut provoquer des blessures grave voir la mort. Kingman recommande que le client soit agé d’au moins 18 ans pour acheter ce produit. Lisez le manuel attentivement et les précautions d’emploi de la bouteille d’air avant d’utiliser ce produit. Toute modification du produit ou de ses pièces d’origines entraînera l’annulation de la garantie ainsi que la responsabilité de Kingman.
Français 8 ÉTAPES POUR COMMENCER À JOUER IMPORTANT: Lire les recommandations de sécurité et de fonctionnement avant de suivre les 8 étapes rapides pour commencer à jouer. 1. Assurez-vous que la sécurité soit sur ON 3. Installez une bouteille de CO2 / d’air comprimé 2. Insérez le dispositif de blocage du canon 4. Installez un chargeur de billes et remplissez-le 5. 6. Mettez vos lunettes de paintball et Retirez le dispositif de blocage du armez le marqueur canon 7. Déverrouillez la sécurité 8.
Français CONSIGNE DE SECURITE SUR LA BOUTEILLE DE CO2/AIR COMPRIME DEMONTER UNE BOUTEILLE DE CO2/AIR COMPRIME Dévisser la bouteille de CO2 ou d’air comprimé de l’adaptateur en tournant dans le sens inverse des aiguilles d’une montre. CONSEIL: après l’utilisation vous devriez toujours démonter la source de gaz de votre lanceur. Quand la bouteille est démontée de l’adaptateur on/off, un excèdent de gaz est purge par le dessous.
Français REGLAGE DE LA VELOCITE, AUGMENTER / DIMINUER DIMINUER STP046 Pour AUGMENTER la vélocité FPS (feet per second = pieds par seconde) utilisez la clef six pans et tournez la pièce VELOCITY ADJUSTER/SPRING GUIDE) dans le sens des aiguilles d’une montre. Pour DIMINUER la vélocité, tournez dans le sens inverse des aiguilles d’une montre. de peinture qui aurait pénétré à l’intérieur du marqueur.
Français ÉTAPE 4 : Introduisez la tige de débranchement pour bloquer l’obturateur du percuteur en place. MISE EN GARDE: avant et après l’utilisation, vérifiez que toutes les vis soient bien serrées, une vis desserrée peut cause de sérieuses blessures.
Français LISTE DES PIECES DU MR4™ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 * 27 28 29 30 31 32 33 ASA057 BAR001 BAR046 BLS035 FND046 FRG002 FRG043 FRG044 FRG046 GRP008 HSE013 HSF004 HSF006 HSF011 ITP015 ITP023 ITP024 ITP025 LPC046 ORG001 ORG002 ORG003 ORG004 ORG025 ORG026 PAK012 REC046 RPN004 RPN005 RPN006 RPN016 RPN017 SAB001 C/A Adapter (matte black) Spyder Barrel Plug 1PCS Barrel 12” (matte black) Ball Stopper Clamping Feed Neck w/Nut & Screw Tactical Shoulder Stock Shroud Ring
POLICE DE GARANTIE Kingman garanti au client original ce produit pour une période de 1 ans à partir de la date d’achat, garantie pièce et main d’œuvre en cas de défaillance sous réserve que le produit est été utilisé dans des conditions normales. Toutes pièce électronique dans les lanceurs Spyder électronique sont garantie 6 mois à partir de la date d’achat. Kingman accepte de réparer ou remplacer à sa discrétion tout produit dans une période de temps raisonnable.
www.spyder.