Manual

BATTERY INSTALLATION

NOTE: This marker is compatible with the use of 9volt Alkaline batteries. Use only premium brand Alkaline batteries

for best performance. (Battery Not Included)

Shot counts will vary depending on the type of 9volt Alkaline battery used (2300 to 3200), choosing a premium

brand battery will give the best results.

Kingman Group recommends using a Spyder 9.6volt NiMH Rechargeable Battery as a power source for optimum

performance and will provide a superior shot count of around 5000 to 6000 rounds. (Spyder Battery and Charger

Sold Separately)

IMPORTANT: Performance will vary depending on the mode used and rate of re achieved.

STEP 1 Remove the three M4x8 Screws from the Right side grip panel. NOTE: Allen wrench provided in the

spare parts kit.

STEP 2 Attach the battery to the battery harness.

STEP 3 Re-tighten the three M4x8 Screws.

HELPFUL TIP: Please note how the parts are removed for easy reassembly.

GRP005

SCR002

WRH002

Part Names and Numbers describe in this section:

Dual Texture Grip Panel (#GRP005)

M4 x 8 Screw (A) (#SCR002)

Battery Harness (#WRH002)