Manualshelf

User's Manual

ManualsBrandsSpyder Controls ManualsSecurity EquipmentRF Fob for periodic TX applications
123
Page 3 of 3
Troubleshooting
If the RF FOB is not operating as expected, watch the Transmit LED and press one of the buttons to see if
it
comes on. If the LED does not come on, check the power source. Replace the CR2032 battery and try operating
the
RF FOB again. If the Transmit LED still does not turn on when pressing a button after troubleshooting the
power
source, the RF FOB has failed and needs to be replaced.
If the RF FOB does not operate as expected but the Transmit LED does come on when pressing one of the
buttons, there is likely a problem with the receiver device. Refer to the documentation of the receiver device being
used for more detailed instructions on troubleshooting and pairing procedures.