User Guide

ManualsBrandsSPYCENTRE Security ManualsWall ChargerSPYCENTRE SECURITY WIFI USB Wall Charger Spy Camera with IR

2002 - USB Charger Camera TinyCam Pro Android/iPhone Application 

Note: If the setup process has been completed yet you cannot connect to the camera,

hold the “Reset” button next to the SD card slot for about 10 seconds and then repeat

the process after the camera has completed rebooting itself.

To Start:

1. Insert a Micro SD card into the TF/SD Card Slot located under the hidden plastic cover on the

right-hand side of the unit.

2. Power the device by plugging it into a wall socket.

3. While you wait for the device to boot up, download the "TinyCam Pro" application from the Apple or

Google Play Store.

4. Enter your phone's settings.

5. Enter the WiFi settings page where you will look for the WiFi signal from the camera.

SpyCentre Security® Since 1993 1-800-292-7748

Summary of content (10 pages)

PAGE 1
SpyCentre Security® Since 1993 1-800-292-7748 2002 - USB Charger Camera TinyCam Pro Android/iPhone Application Note: If the setup process has been completed yet you cannot connect to the camera, hold the “Reset” button next to the SD card slot for about 10 seconds and then repeat the process after the camera has completed rebooting itself. To Start: 1. Insert a Micro SD card into the TF/SD Card Slot located under the hidden plastic cover on the right-hand side of the unit. 2.
PAGE 2
6. Connect with the WiFi of the camera, ex: AIS-xxxxxx-xxxxx. 7. Your phone may ask you to pick between using Cellular or WiFi. Select the WiFi option. 8. Open "TinyCam Pro" and wait a few moments. ( Continued on the next page ) 9. Click + at the bottom of the screen. 10. Select the mode to add the camera: LAN search, Direct mode, or Add QR code.
PAGE 3
Settings Page: 1. To the bottom right of the camera listing is an icon that looks like a wrench. Click this "Settings" icon to go into the settings for that camera. 2. When finished with a setting, click the < back button to enter the main page.
PAGE 4
WiFi Configuration: 1. Click the gear icon to get to the Device Information page. 2. Click Wi-Fi Config. 3. Enter the WiFi name, enter the password, and then hit Next. NOTE: the device will not connect with a 5G network. 4. The device will reboot and reconnect to the WiFi. 5. Exit the application for 30 seconds. Check your phone's WiFi settings to see if the camera ID has disappeared and if you have reconnected to your home/office WiFi. 6. Log back into the application and check if the camera can be viewed.
PAGE 5
Recording Configuration: 1. Within the settings page, select "Micro SD Card Config" 2. Select "Record Mode" 3. Click either “Off” “Full Time” or “Alarm” Off: No recording Full Time: Continuous Recording Alarm: Motion Activation Recording 4. Once selected go back one screen and select “Alarm Config” to adjust the motion activation sensitivity Setting the Date/Time of Recordings: 1. If the time displayed is not correct it can be manually adjusted 2. Click the setting icon and select “device Time Zone” 3.
PAGE 6
Reviewing Recordings: 1. To review files on a computer, pull the SD card, plug it into a Windows or Mac computer, and use VLC Media Player for playback 2. To review files through TinyCam Pro, select the file button “Remote Record” located underneath the camera on the home screen 3. Select the time frame you desire to pull from the memory card 4. You may click any video file to "Play" 5.
PAGE 7
Live Stream: 1. When at the main page, tap the camera to start the live stream. The camera may require a moment to connect, especially if your phone is connected to a cellular service. 2. When viewing the live stream, keep the phone upright in order to see all the options, or flip the phone on the side to view a full screen. 3. The camera icon at the bottom left will take a snapshot photo of the live stream and save it to the application memory. 4. Tapping the video camera icon will start a video recording.
PAGE 8
How to Playback files on a PC: 1. Remove the Micro SD card from the device and connect it to the computer with an SD card reader. 2. The PC will recognize the device as a removable disk. 3. Open the “rec” folder. 4. Double click the file you wish to play. NOTE: To playback the files on these devices, you will need to download a media player that can play .MP4 format. We recommend VLC media player. How to Delete the files on a PC: 1. Open the “rec” folder. 2.
PAGE 9
How to Playback files on a Google Chromebook: 1. Remove the Micro SD card from the device and connect it to the computer with an SD card reader. 2. A pop-up menu may occur. If so, select “View Files.” 3. If a pop-up does not occur, select the O icon (called the app launcher) “similar to a windows icon button” located in the bottom left corner of the screen. 4. Underneath the Google Drive are My Drive, Downloads, New Services, and something else that may be named “REMOVABLE DRIVE.” 5.
PAGE 10
VLC Media Player (Recommended for optimal usage) How to download and use VLC media (Windows) 1. www.videolan.org 2. Click the blue “download VLC.” 3. It will open a new window and begin downloading. 4. If it does not automatically begin downloading, press “Click here” and select one of the mirrored sites. 5. Once downloading has been completed, select “Run” and install. 6. Once finished, a VLC icon will now be available on your PC. 7.