User Guide

Note: If the setup process has been completed yet you cannot connect to the camera,
hold the “Reset” button next to the SD card slot for about 10 seconds and then repeat
the process after the camera has completed rebooting itself.
To Start:
1. Insert a Micro SD card into the TF/SD Card Slot at the back of the unit.
2. Power the device with the included cable and press the “On/Off” button for a second to start the
camera.
3. While you wait for the device to boot up, download the "TinyCam Pro" application from the Apple or
Google Play Store.
4. Enter your phone's settings.
5. Enter the WiFi settings page where you will look for the WiFi signal from the camera.
6. Connect with the WiFi of the camera, ex: AIS-xxxxxx-xxxxx.
7. Your phone may ask you to pick between using Cellular or WiFi. Select the WiFi option.
8. Open "TinyCam Pro" and wait a few moments.
( Continued on the next page )