/ Marley MS Cooling Tower /
SPX COOLING TECHNOLOGIES SPX Cooling Technologies has worldwide recognition as the pacesetter in the field of water cooling technology. Unique within its industry in the scope of products and services offered,we design and manufacture cooling towers of virtually any capacity and configuration. More than 400 Marley tower models are available to service the application requirements of air conditioning, industrial processing and electric generation.
COMPONENTS FILL: Marley MC high performance PVC film fill sheets are thermoformed at the Marley factory to exacting quality and strength standards. Maximum performance and clog resistant designs are both available for a wide range of thermal and water quality requirements. ELIMINATORS: Marley XCEL® drift eliminator panels—formed from PVC sheets into a cellular configuration—offer the lowest drift rates in the industry. They significantly lower air pressure losses, reducing fan horsepower requirements.
GEAREDUCERS: Marley Geareducer® drives are the industry quality standard. They are designed to meet or exceed the requirements of CTI STD-111 and AGMA Std, 420.4, and are runin under load prior to shipment. Numerous reduction ratios are available so that horsepower is applied at optimum fan speed. FANS: Designed, tested and manufactured by Marley, fan materials include cast aluminum alloy, glass reinforced polyester and glass reinforced epoxy.
MECHANICAL EQUIPMENT SUPPORT: The Marley hotdipped galvanized torque tube unitized support assures permanent alignment of the motor, driveshaft and Geareducer. FAN CYLINDERS: Marley FRP fan cylinders feature venturi shaped eased inlets and close fan tip clearance for maximum efficiency. If required, a concrete fan cylinder may be utilized. DISTRIBUTION SYSTEM: Marleypatented non-clogging, large diameter NS spray nozzles assure an unimpeded, uniform flow with min-imal operating pump head.
SPECIFICATIONS COOLING TOWER: Furnish and install (1) Induced Draft Counterflow Cooling Tower. Cooling tower shall be______ft. long x ______ft. wide x ______ ft. overall height with a maximum operating weight of______lbs. Cooling tower shall consist of_____fan cells with a maximum of_____total fan horsepower and a maximum pump head of______ft. Other contractor(s) will furnish all external piping, valves, pumps, electrical equipment other than cooling tower fan motors, wiring, controls, etc.
7401 WEST 129 STREET OVERLAND PARK, KANSAS 66213 UNITED STATES 913 664 7400 spxcooling@spx.com spxcooling.com In the interest of technological progress, all products are subject to design and/or material change without notice. ©2008 SPX Cooling Technologies, Inc.