Use and Care Manual

VII. Operating Your Wine Cooler

Control panel

There are three touch-buttons on the control panel:

• “ ” and “ ” increases or decreases the set temperature by 1°F (temp range

is 51-64°F).

• “Light” button turns on or off the interior light.

Note:

• This unit is designed for indoor use, best when ambient temperature is

around the mid-70’s.

• Placing the unit in extreme cold or hot conditions may cause interior

temperature to fluctuate and the range of 51-64°F m ay not be reached.

• The number of bottles placed, location (upper, middle or lower section) and if

the interior light is on may also cause the interior temperature to fluctuate.

• When the ambient temperature is 77°F or higher, un it is capable of

maintaining a set temperature in the low-50’s.

• When the ambient temperature around 70°F, unit can maintain a temperature

in the high-40’s.

• This unit is equipped with heating element. Should the ambient temperature

fall below set temperature, unit will heat to maintain set temperature.

VIII. Care And Maintenance

Cleaning your wine cooler

• Unplug the wine cooler and remove any bottles.

• Wipe the inside with a cloth soaked in warm water and baking soda solution.

(2 tablespoons of baking soda to 1 quart of water).

• Wipe the exterior with a soft damp cloth. If excessively dirty, clean with mild

detergent and warm water.

• Remove water tray. This can be wash under running water.

Moving your wine cooler

• Remove all bottles.

• Remove or securely tape down shelves and any loose items inside the unit.

• Turn the leveling legs up to the base to avoid damage.

• Tape the door.

• Be sure the wine cooler stays in the upright position during transportation.