SDS

_____________________________________________________________________________________________
1294614 - R600a Products Revision Date 12-Apr-2017
First aid measures
General advice
In case of rupture. Do not get in eyes, on skin, or on clothing. Do not breathe
dust/fume/gas/mist/vapors/spray.
Inhalation
Remove to fresh air. If breathing is difficult, (trained personnel should) give oxygen. If not
breathing, give artificial respiration.
Eye contact
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and
continue flushing for at least 15 minutes. Seek immediate medical attention/advice.
Skin contact
In case of contact with liquefied gas, thaw frosted parts with lukewarm water.
Ingestion
Not an expected route of exposure. Call a physician immediately.
Most important symptoms and effects, both acute and delayed
Symptoms
No information available.
Indication of any immediate medical attention and special treatment needed
Note to physicians
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment.
Unsuitable extinguishing media
DO NOT EXTINGUISH A LEAKING GAS FIRE UNLESS LEAK CAN BE STOPPED.
Specific hazards arising from the
chemical
Cylinders may rupture under extreme heat. Damaged cylinders should be handled only by
specialists. Containers may explode when heated. Ruptured cylinders may rocket.
Hazardous Combustion Products
Carbon oxides.
Explosion Data
Sensitivity to Mechanical Impact
Yes.
Sensitivity to Static Discharge
None.
Special protective equipment for
fire-fighters
Firefighters should wear self-contained breathing apparatus and full firefighting turnout
gear. Use personal protection equipment.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Stop leak if you can do it without risk.
Other Information
Ventilate the area.
Methods and material for containment and cleaning up
Methods for containment
If possible, turn leaking containers so that gas escapes rather than liquid. Allow substance
to evaporate.
Methods for cleaning up
Do not direct water at spill or source of leak.
_____________________________________________________________________________________________
Page 3 / 9