Mini Electronic Pulse Massager UC-030B Operating Manual
Contents Introduction………………………………………………………………………...2 Safety warnings.…………………………………………………………………....3 Part identification ……………………………………………………………… …4 Operating instructions………………………………………………...………….5-6 Program schematics………………..…………………………………………….7-8 Recommended use points...………………………………………………………...9 Trouble shooting……………………………………………………………………9 Warranty info……………………………………………………………………....
Introduction UC-030B Mini Electronic Pulse Massager is a pain relief product, which delivers electric impulses to tired and sore muscles. These impulses are generated by the device and delivered through the connecting wires and electrodes to the target body areas. The impulses mimic the action potential coming from the central nervous system to trigger contraction of the muscle. UC-030B is portable, compact, and stylish in design.
Safety warnings If you have one of the following conditions, please consult with your physician before purchasing or using this device. Acute disease; malignant tumor; infective disease; pregnant; heart disease; high fever; abnormal blood pressure; lack of skin sensation or an abnormal skin condition; any condition requiring the active supervision of a physician.
Part Identification 1.USB port 2.On/off switch 3.LCD screen 4.Channel outlets 5.Intensity adjustment 6.Mode selector 7. Timer adjustment 8. Play/Pause button 9. USB charger 10. USB cable 11. Electrode pads 12. Lead wires 1. Magnets 2. Hook and loop 3. Pin holes 4. Snaps 1&2: Hook and loop 3.
Operating Instructions Before initial use, charge the massager for a minimum of 8 hours. Make sure power switch is in the OFF position before you connect pad, slipper or belt. ELECTRODE PAD 1. Connect lead wire(s) by inserting the plug into the Left and/or Right channel outlets. 2. Connect electrode pads to lead wires by snapping them on. This should be done before applying pads to the skin. 3. Place pads to treatment areas (such as shoulder or lower back), make sure pads do not touch each other.
Note: • Timer continues to count down even when session is paused. • To conserve battery, unit will power off 5 seconds after a session completes. To begin another session, first switch the power button to OFF position and back to ON. Recommended practices: • Duration of 20 minute for each body area. • Frequency of 1-2 times per day per area. • Start from the lowest intensity and gradually adjust to a comfortable level on a scale level from to 1 to 10.
Massage Mode Acupuncture Mode Tapping Mode 7
Scraping Mode Cupping Mode Kneading Mode 8
Recommended use points Troubleshooting If your device is not operating properly, please check below for common problems and suggested solutions. If the recommended action does not solve the problem, please contact Sunpentown Customer Service at 1-800-330-0388 or service@sunpentown.com. Stimulation is weak or non-existent • Be sure skin is clean and pads are firmly attached to skin. • Be sure the pads are not touching each other. • Check wire connection and make sure lead wires are securely plugged in.
Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: • Sunpentown must be notified of the fault. • Proof of purchase must be presented to Sunpentown’s nominated representative. • The warranty will be void if the product if modified, misused or repaired by an unauthorized person.
