Instruction Manual ICE MAKER Model: IM-100 It is important that you read these instructions before using your portable ice maker and we strongly recommend that you keep them in a safe place for future reference.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS …………………………………………………….1 PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS …………………………………………………………………..2 GETTING TO KNOW YOUR UNIT ……………………………………………………………3 OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER …………………………………………………………….4 CONNECTING YOUR ICE MAKER …………………………………………………………..4 CLEANING AND MAINTAINING YOUR ICE MAKER ………………………………………4 USING YOUR ICE MAKER …………………………………………………………………….5 TROUBLESHOOTING ………………………………………………………………………….
IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages in this manual in regards to your appliance. Always read and obey all safety massages. This is the safety alert symbol: ! All safety messages will follow the safety alert symbol and the word “DANGER” or “WARNING”. ! DANGER ! WARNING These warnings mean: You could be seriously injured if you don’t follow immediate instructions.
PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. Do not operate this or any other appliance with a damaged cord. Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.
GETTING TO KNOW YOUR UNIT 1. Cover: With a transparent window to allow interior visibility. 2. Control Panel: Easy to use, visible functions and 1-touch display setting. A) Starts or stops ice making cycle. B) Selects ice cube size. 3. Water drain cap: For draining water from water reservoir. 4. Ice basket. 5. Ice scoop. 6. Ice shovel.
OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER 1. Remove all exterior and interior packaging. Check that ice basket and ice scoop is included. If any part or accessory is missing, please contact our customer service. 2. Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and wash it in warm water. 3. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e.: stove, furnace, radiator).
USING YOUR ICE MAKER 1. Clean your ice maker first. 2. Open the cover, remove the ice basket and pour water into tank. Keep water level below the level mark. 3. Plug in the unit and the power indicator light will blink. 4. Press “Power” on the control panel to begin the ice making cycle. The power indicator light will lit. 5. Select the size of the ice cube by pressing the “Select” button. If ambient temperature is below 60°F, it is recommended to select small or medium size to avoid ice sticking together.
TECHNICAL PARAMETERS SPECIFICATION Model IM-100 Protection Type I Power 120V / 60Hz Rated Current 1.
ICE MAKER Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired or replaced free of charge. This guarantee is subject to the following terms: SPTUSA, must be notified of the fault. Proof of purchase must be presented to SPTUSA’s nominated representative. The warranty will be void if the product is modified, misused or repaired by an unauthorized person.
