1 CDCM0350C0-0002R7SPD SERIES ULTRACAPACITOR CELL CDCM ULTRACAPACITOR CELL Rev Date Revision of historical records V2019-1 24-10-19 The First Release SCOPE These are the specifications of SPS CAP (Electric Double Layer Capacitor) which you are using, please review this document and approve it.
2 CONSTRUCTION AND DIMENSIONS 1) Construction Inside structure: fold anode and cathode electrode with separator Outer structure: aluminum case, insulating sleeve 2) Dimensions DIMENSION(mm) PART NUMBER CDCM0350C0-0002R7SPD L1 L2 63.8 69.7 PART NUMBER NAMING SYSTEM CDCM Product Series C Cell D Electric double layer C Cylindrical M 0350 C 0 - Nominal Capacitance (F) 0350 Decimal 0 0.0 Middle Document number: DT13-08-201902-E Rev. & Date: V2019-1 2019.10.
3 GENERAL CHARACTERISTICS Items Specification Rated Voltage (V DC) 2.7 Surge Voltage (V DC) 2.85 Operating Temp. ( ) -40 Rated Capacitance (F) Capacitance Tolerance +65 350 0% 20% ESR Max. (AC@1KHz, mΩ) 1.50 ESR Max. (DC, mΩ) 2.50 Maximum Continuous Current (ΔT=15℃, A) 26 Maximum Continuous Current (ΔT=40℃, A) 43 Maximum Peak Current (A) (1s) 252 Max.LC (Room Temp. after 72hrs, mA) 0.5 Typical Thermal Resistance (R th , Housing, ℃/W) 8.
4 ITEM SPECIFICATION Capacitance ESR Capacitance Temp. Characteristics Change within 5% of Initial Value Step. 1 Step. 2 ESR Capacitance Step. 3 ESR Capacitance ESR Vibration Test Thermal Cycle Humidity Test DC Life Shelf Life Cycle Life CONDITION Change within 50% of rated value Change within 5% of Initial Value Step 2:+65± 2℃, 1h Change within 5% of Initial Value Step 3: -25± 2℃, 1h Change within 50% of rated value Step.
5 1) Charge and Discharge procedure (Figure 1) A) Charge the capacitor using constant current I to rated voltage V0 B) Keep rated voltage 5 mins C) Discharge the capacitor using constant current I to half rated voltage, record discharge time T1 during voltage change from V1to V2 D) Rest 2-5s, record voltage change ΔV E) Discharge it to a very low voltage around 0.
6 Please notice below points when you start use SPSCAP. 1) The SPSCAP gets polarity through aging/testing process before it is packed, so please mount it in accordance with its polarity to maintain the best condition; 2) Please only apply SPSCAP at rated voltage.
7 PACKING Part Number CDCM0350C0-0002R7SPD Quantity (pcs) Box Siz e ( W× L× H ) mm Gross Weight (kg) 256 365× 365× 385 21.43 Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. NINGBO CRRC NEW ENERGY TECHNOLOGY CO.,LTD. Add: No.199 Shidai Road,Wuxiang Town,Yinzhou District, Ningbo,Zhejiang,China Email: info@spscap.com Website: www.spscap.com Document number: DT13-08-201902-E Rev. & Date: V2019-1 2019.10.24 2.
