User's Guide

7. After making sure that there are no water droplets on the camera, open the
battery cover and use a soft dry cloth to gently wipe off any water or sand
remaining on the waterproof packing or inside the camera.
x If the cover is closed when the inside is wet, this could cause
condensation or a malfunction.
Cleaning After Using the Camera in Conditions Other than Underwater
Use a blower to remove any dust or lint that adheres to the lens, monitor or camera
body. To remove fingerprints or other stains that cannot be removed with a blower,
gently wipe the parts with a soft dry cloth. If you wipe with too much pressure or with
a rough cloth, it may damage the camera or cause a malfunction.
Storage
If you do not intend to use the camera for an extended period, remove the battery
and avoid storing the camera in any of the following types of locations:
x Places that are poorly ventilated or subject to humidity of over 60%
x Place exposed to temperatures above 50°C (122°F) or below -10°C (14°F).
x Place next to equipment that produces strong electromagnetic field, such as
television or radios.
To prevent mold or mildew, take the camera out of storage at least once a month,
and turn it on and release the shutter a few times before putting it away again.