User's Guide

Turn the Product Off before Removing or Disconnecting the Power Source or
Memory Card
Do not remove the battery while the product is on, or while images are being saved
or deleted. Forcibly cutting power in these circumstances could result in loss of data
or cause damage to the memory card or internal circuitry.
Notes about the LCD Screen
x The LCD Screens are constructed with extremely high precision; At least
99.99% of pixels are effective, with no more than 0.01% being missing or
defective. Hence, while these displays may contain pixels that are always lit
(white, red, blue or green) or always off (black), this is not a malfunction and
has no effect on images recorded with the device.
x Images viewed on the LCD screen may be difficult to see under certain
lighting.
x Do not apply pressure to the LCD screen, as this could cause damage or
malfunction.
The Battery
Precautions for Use
x Note that the battery may become hot after use.
x Do not use the battery at ambient temperatures below 0°C (32°F) or above
40°C (104°F) as this could cause damage or malfunction.
x If you notice any abnormalities such as excessive heat, smoke, or an unusual
smell coming from the battery, immediately discontinue use and consult your
retailer.
x After removing the battery from the camera or optional battery charger, put
the battery in a plastic bag, etc. in order to insulate it.
Charging the Battery
Check the battery level before using the camera and replace or charge the battery if
necessary.
x Charge the battery indoors with an ambient temperature of 5°C (41°F) to
35°C (95°F) before use.
x A high battery temperature may prevent the battery from charging properly or